Free field guide · 10 page PDF
Eight engineering filaments tested on the Bambu X2D: what each one is best at, what to watch for, and which support interface to pair it with.
Where should we send it?
Tell us your first name and email, and the PDF link is on its way.
Free. No spam, just the guide and the occasional 3D printing email from Nick. Unsubscribe any time.
Every material gets its strengths, what to watch for, what it’s best for and the interface to pair it with.
PA6-CF, PA6-GF, PA12-CF and EZ PA. Stiff, strong and heat resistant, from the hardest nylon to the easiest.
ABS-GF, ASA and PC-ABS. Rigid indoor parts, UV and weather resistance, and PC heat with ABS ease.
PC. The toughest, most heat resistant common FDM material, and very hard to print.
Heat, standout trait, difficulty and interface for every material, side by side.
Popping, lifting corners, weak layers, clogs and fused supports, each with its likely cause and fix.
Pick a material by the job, then pair it with the right support interface.

Model on the main nozzle, interface on the auxiliary nozzle. From the guide:
Plus the six rules that apply to all eight, from drying to hardened steel nozzles.
Made by Nick from Planet 3DP, where 80,000+ makers subscribe on YouTube. This guide goes with his video “I Tested Every Engineering Filament on the Bambu X2D”, which has 63,000+ views.
It takes ten seconds. The link lands in your inbox.