FDM

AON3D Hylo

250C Active Chamber / 25+ Sensors / AI Process Monitoring

PRICE
Sold by quote
AON3D sells this machine by quote and publishes no price. Ask AON3D for one.
Build volume
650 x 450 x 450 mm
Max speed
500 mm/s
Enclosure
Fully Enclosed
Multi-color
Yes
01 · Specs

Specifications

Specs and prices come from manufacturer listings and can change. Spot an error? Let us know.

ManufacturerAON3D
Printing technologyFDM
ReleasedJanuary 2024
Build volume650 x 450 x 450 mm
Max print speed500 mm/s
Max nozzle / vat temp500 °C
EnclosureFully Enclosed
Enclosure detailsActive
Multi-colorYes · IDEX
Key feature250C Active Chamber / 25+ Sensors / AI Process Monitoring
AudienceProfessional & Industrial
Best forIndustrial
PriceSold by quote

What the AON3D Hylo is

The Hylo is AON3D’s large industrial printer for high temperature engineering plastics. It is a filament machine with two independent extruders, and AON3D aims it at aerospace, defence and manufacturing. AON3D bills it as the world’s first AI powered 3D printer, a claim built on its sensors and software.

Heat is the point

AON3D’s spec sheet lists a 500°C nozzle, a 250°C bed and a chamber that also reaches 250°C, heating from room temperature in under an hour. Those temperatures are what the Hylo is for. AON3D lists PEEK, PEKK, PEI, PPSU and PSU among dozens of materials, plus carbon fibre, glass fibre and Kevlar filled grades. The build volume is 650 by 450 by 450 mm, and AON3D quotes up to 500 mm/s printing and 600 mm/s travel.

The two extruders run single, multi material or support modes, with water soluble, detergent soluble or breakaway supports. AON3D lists duplication mode as an option coming in 2026. The material bay holds four 2.2 kg reels or two 5 kg reels, kept dry and loaded automatically. Filament is 1.75 mm, and AON3D says there are no unlock fees for materials.

Sensors and software

AON3D lists more than 25 built in sensors, including linear encoders on all three axes, nozzle force sensing and a camera that inspects the nozzle and calibrates the offset between the two heads. Its Basis software uses that data, and AON3D claims it makes parts up to 85% stronger.

What it takes to install

This is a factory machine. AON3D lists a weight of 650 kg, an installed size of 1258 by 870 by 1892 mm, a 208 to 240 V supply at 50 A, a compressed air supply, and HEPA plus activated carbon filtration.

How it is sold

AON3D publishes no price on its own site. The Hylo is sold by quote, through AON3D’s quote and demo requests and through Vision Miner, which also lists it and asks buyers to request a quote. Planet 3DP has not tested the Hylo. The figures here are from AON3D’s page and spec sheet, read on 26 October 2026.

How the AON3D Hylo compares

Its 650 x 450 x 450 mm build volume is bigger than 170 of the 187 other FDM 3D printers with a build volume on file. Its listed top print speed of 500 mm/s is faster than 94 of the 188 other FDM 3D printers with a speed on file.

It went on sale in January 2024, about 3 years ago.

Closest alternatives

  • BigRep VIIO 250 has a bigger 1,000 x 500 x 500 mm build volume and is also sold by quote.
  • CreatBot D600 Pro2 HS has a bigger 600 x 600 x 600 mm build volume, is slower at 300 mm/s and is also sold by quote.
  • BCN3D OMEGA I60 has a smaller 450 x 300 x 450 mm build volume, is slower at 300 mm/s and is also sold by quote.
  • Stratasys F3300 has a bigger 600 x 600 x 800 mm build volume, is faster at 1,000 mm/s and is also sold by quote.

Worked out from the makers' specs and typical prices listed on Planet 3DP, not from our own tests. Spot an error? Let us know.