What the AON3D Hylo is
The Hylo is AON3D’s large industrial printer for high temperature engineering plastics. It is a filament machine with two independent extruders, and AON3D aims it at aerospace, defence and manufacturing. AON3D bills it as the world’s first AI powered 3D printer, a claim built on its sensors and software.
Heat is the point
AON3D’s spec sheet lists a 500°C nozzle, a 250°C bed and a chamber that also reaches 250°C, heating from room temperature in under an hour. Those temperatures are what the Hylo is for. AON3D lists PEEK, PEKK, PEI, PPSU and PSU among dozens of materials, plus carbon fibre, glass fibre and Kevlar filled grades. The build volume is 650 by 450 by 450 mm, and AON3D quotes up to 500 mm/s printing and 600 mm/s travel.
The two extruders run single, multi material or support modes, with water soluble, detergent soluble or breakaway supports. AON3D lists duplication mode as an option coming in 2026. The material bay holds four 2.2 kg reels or two 5 kg reels, kept dry and loaded automatically. Filament is 1.75 mm, and AON3D says there are no unlock fees for materials.
Sensors and software
AON3D lists more than 25 built in sensors, including linear encoders on all three axes, nozzle force sensing and a camera that inspects the nozzle and calibrates the offset between the two heads. Its Basis software uses that data, and AON3D claims it makes parts up to 85% stronger.
What it takes to install
This is a factory machine. AON3D lists a weight of 650 kg, an installed size of 1258 by 870 by 1892 mm, a 208 to 240 V supply at 50 A, a compressed air supply, and HEPA plus activated carbon filtration.
How it is sold
AON3D publishes no price on its own site. The Hylo is sold by quote, through AON3D’s quote and demo requests and through Vision Miner, which also lists it and asks buyers to request a quote. Planet 3DP has not tested the Hylo. The figures here are from AON3D’s page and spec sheet, read on 26 October 2026.


