LulzBot TAZ 8 XT 3D printer, a tall open black frame with a large lime green twisted vase printed on the bed
FDM

LulzBot TAZ 8 XT

582 mm Tall Build Height / Asteroid 285 Tool Head with 1.2 mm Nozzle / Active Bed Cooling

TYPICAL PRICE
$7,495
Estimate from manufacturer listings. Check the store for today’s price.
Build volume
295 x 295 x 582 mm
Enclosure
Open Frame
Multi-color
No
01 · Specs

Specifications

Specs and prices come from manufacturer listings and can change. Spot an error? Let us know.

ManufacturerLulzBot
Printing technologyFDM
Build volume295 x 295 x 582 mm
Max nozzle / vat temp290 °C
EnclosureOpen Frame
Enclosure detailsOpen frame, enclosure optional
Multi-colorNo
Key feature582 mm Tall Build Height / Asteroid 285 Tool Head with 1.2 mm Nozzle / Active Bed Cooling
AudienceProfessional & Industrial
Best forIndustrial
Typical price$7,495

What the LulzBot TAZ 8 XT is

The TAZ 8 XT is the tall version of LulzBot’s TAZ 8. It keeps the TAZ 8’s 295 by 295 mm bed and roughly doubles the height, to a maximum print volume of 295 x 295 x 582 mm, or 11.5 x 11.5 x 22.9 inches. LulzBot designs and builds it in Fargo, North Dakota, and pitches it at professionals who need tall parts in one piece. On 27 October 2026 LulzBot’s own US store sold it in one configuration at 7,495 dollars.

Built around one big tool head

Where the TAZ 8 lets you choose a tool head at checkout, the XT ships with the Asteroid 285. It’s LulzBot’s large layer head with a 1.2 mm GammaMaster steel nozzle, and the equipped layer height runs from 0.3 to 0.9 mm. That suits tall, chunky prints more than fine detail. Across the platform’s other tool heads LulzBot quotes 0.05 to 1.8 mm. It takes 2.85 mm filament as standard, with 1.75 mm optional depending on the head. Tool heads swap without tools, using a magnetic cap and thumbscrews.

Heat, motion and speed

The hot end reaches 290°C. The magnetic flex bed is rated to 80°C, lower than the standard TAZ 8’s 110°C. X and Y run on linear rails, and Z on 12 mm rods with polymer bushings. LulzBot gives a maximum travel speed of 150 mm/s, firmware limited, against 500 mm/s on the TAZ 8. That’s a travel figure rather than a print speed, so the spec table leaves print speed blank.

What it shares with the TAZ 8

The XT has the same active bed cooling, which LulzBot says cuts cool down times by more than half, plus runout and jam detection and a glove friendly resistive touch screen. Bed levelling uses a BLTouch probe with a 32 point mesh, and the printer calibrates X axis tramming, Z offset and backlash by itself. It runs Marlin, slices with Cura LulzBot Edition, and prints from an 8 GB SD card or over USB. An enclosure is an optional accessory.

What we don’t know

Every figure here is LulzBot’s own, from its TAZ 8 XT store page, read on 27 October 2026. Planet 3DP hasn’t tested one. LulzBot hasn’t published a launch date for the XT, so no release date is listed, and it doesn’t give a print speed or a weight.

How the LulzBot TAZ 8 XT compares

Its 295 x 295 x 582 mm build volume is bigger than 147 of the 187 other FDM 3D printers with a build volume on file. Its typical price starts at $7,495, higher than 122 of the 131 other current FDM 3D printers with a price on file.

Closest alternatives

  • BCN3D EPSILON W50 SC has a smaller 420 x 300 x 400 mm build volume, is fully enclosed and starts at $8,000.
  • UltiMaker S8 has a smaller 330 x 240 x 600 mm build volume, is fully enclosed and starts at $9,000.
  • Tiertime UP600 has a bigger 400 x 500 x 600 mm build volume, is fully enclosed and starts at $7,500.
  • Tiertime UP400 Pro has a bigger 400 x 400 x 400 mm build volume, is fully enclosed and starts at $5,000.

Worked out from the makers' specs and typical prices listed on Planet 3DP, not from our own tests. Spot an error? Let us know.

02 · More from LulzBot

Also worth a look

LulzBot TAZ 8 3D printer, an open black frame with the control box on the left, a lime green Meteor tool head and a spool of filament on the right
Open Frame
FDM

LulzBot TAZ 8

295 x 295 x 285 mm mmReleased Mar 2025
+ Add to compare
Open FrameDiscontinued
FDM

LulzBot TAZ Pro

280 x 280 x 285 mm mm150 mm/sReleased Mar 2019
+ Add to compare