LulzBot TAZ 8 3D printer, an open black frame with the control box on the left, a lime green Meteor tool head and a spool of filament on the right
FDM

LulzBot TAZ 8

Swappable Galaxy Series Tool Heads / Active Bed Cooling / Linear Rails on X and Y

TYPICAL PRICE
$5,395 to $5,995
Estimate from manufacturer listings. Check the store for today’s price.
Build volume
295 x 295 x 285 mm
Enclosure
Open Frame
Multi-color
Yes
01 · Specs

Specifications

Specs and prices come from manufacturer listings and can change. Spot an error? Let us know.

ManufacturerLulzBot
Printing technologyFDM
ReleasedMarch 2025
Build volume295 x 295 x 285 mm
Max nozzle / vat temp290 °C
EnclosureOpen Frame
Enclosure detailsOpen frame, enclosure optional
Multi-colorYes · Dual extrusion (Twin Nebula tool head)
Key featureSwappable Galaxy Series Tool Heads / Active Bed Cooling / Linear Rails on X and Y
AudienceProfessional & Industrial
Best forPrint Farms
Typical price$5,395 – $5,995

What the LulzBot TAZ 8 is

The TAZ 8 is LulzBot’s open frame professional FFF printer, designed and built in Fargo, North Dakota. LulzBot unveiled it on 25 March 2025, and its store page was taking orders that same day. LulzBot pitches it at manufacturers, research labs and production teams that run printers around the clock, and calls it print farm ready. Planet 3DP lists it as the newer model for the TAZ Pro, LulzBot’s earlier dual extruder machine, which LulzBot’s own store no longer has available to buy.

Price and tool heads

LulzBot sells the TAZ 8 on its own US store, and the price depends on the tool head you pick. We read the prices on 27 October 2026. With the Meteor 175 or Meteor 285 single tool head it costs 5,395 dollars. The Asteroid 285, a large layer head with a 100W heater and a 1.2 mm nozzle, is 5,795. The Twin Nebula 175 and Twin Nebula 285 dual extrusion heads are 5,995. LulzBot’s launch post says the factory options focus on the Twin Nebula heads, which print two materials or two colours in one part. Tool heads swap without tools, using a magnetic cap and three thumbscrews.

Size, heat and motion

LulzBot gives the maximum print volume as 295 x 295 x 285 mm. The hot end reaches 290°C and the magnetic flex bed 110°C. Layer height runs from 0.1 to 0.4 mm with the equipped head, and from 0.05 to 1.8 mm across the platform’s tool heads. X and Y run on linear rails, and the Z axis has independent gearboxes on 12 mm rods. LulzBot quotes a maximum travel speed of 500 mm/s, firmware limited. That’s a travel figure, not a print speed, so the spec table leaves print speed blank.

Features aimed at uptime

The TAZ 8 is LulzBot’s first printer with active bed cooling, which LulzBot says cuts cool down times by more than half between jobs. A BLTouch probe builds a 16 point mesh, and the printer calibrates X axis tramming, Z offset and backlash by itself. Sensors watch for filament runout and jams. The touch screen is resistive, so it works with gloves on. It runs Marlin on a 32 bit Archim 2.2b board, slices with Cura LulzBot Edition, and prints from an 8 GB SD card or over USB. An enclosure is an optional accessory. LulzBot lists PLA, TPU, ABS, PETG, PVA, PVB, nylon and PC among the materials it prints.

What we don’t know

Every figure here is LulzBot’s own, from its TAZ 8 store page and launch post, read on 27 October 2026. Planet 3DP hasn’t tested a TAZ 8. LulzBot doesn’t publish a print speed, a weight or a footprint on the page, so none is listed.

How the LulzBot TAZ 8 compares

Its 295 x 295 x 285 mm build volume is bigger than 101 of the 187 other FDM 3D printers with a build volume on file. Its typical price starts at $5,395, higher than 119 of the 131 other current FDM 3D printers with a price on file.

It went on sale in March 2025, about 1 and a half years ago.

Closest alternatives

  • UltiMaker Factor 4 Plus has a smaller 330 x 240 x 300 mm build volume and is fully enclosed.
  • UltiMaker S6 has a smaller 330 x 240 x 300 mm build volume, is fully enclosed and starts at $7,000.
  • Craftbot Flow IDEX XL MK2 has a bigger 425 x 250 x 500 mm build volume, is fully enclosed and starts at $4,500.
  • Tiertime UP350/UP350D has a bigger 350 x 350 x 350 mm build volume, is fully enclosed and starts at $4,000.

Worked out from the makers' specs and typical prices listed on Planet 3DP, not from our own tests. Spot an error? Let us know.

02 · More from LulzBot

Also worth a look

LulzBot TAZ 8 XT 3D printer, a tall open black frame with a large lime green twisted vase printed on the bed
Open Frame
FDM

LulzBot TAZ 8 XT

295 x 295 x 582 mm mm
+ Add to compare
Open FrameDiscontinued
FDM

LulzBot TAZ Pro

280 x 280 x 285 mm mm150 mm/sReleased Mar 2019
+ Add to compare