Some links on this page are affiliate links. If you buy through one, Planet 3DP earns a small commission at no extra cost to you. It never changes what we recommend. How this works.
The best 3D scanner for most people who already own a 3D printer is the Creality Pika. It costs 699 dollars, weighs about 260 g, and has a blue laser for small parts plus an infrared mode for bigger things. On a tight budget, the 299 dollar Creality Ferret SE is the cheapest way in. Every pick here is spec based. Nick hasn’t tested a scanner yet.
Bambu Lab’s first scanner, the S1, isn’t ranked. Its own page still says it’s coming in November, with no price and no specs, so a short box further down says where it stands.
- Best for most printer owners
- Creality Pika, 699 dollars. Blue laser and infrared, about 260 g. Not tested by Nick.
- Best budget
- Creality Ferret SE, 299 dollars. Up to 0.1 mm, by Creality. Not tested by Nick.
- Most detail for the money
- Creality Raptor, 879 dollars against a 1,499 list. Up to 0.02 mm. Not tested by Nick.
- Best with no computer
- Revopoint MIRACO Plus, 1,869 dollars. It has its own screen. Not tested by Nick.
- Newest high end pick
- Elegoo M1 Ultra, five scan modes. Check the current price. Not tested by Nick.
- Bambu Lab S1
- Not out yet. No price or specs on Bambu’s page.
Prices from the Planet 3DP price tracker and Creality’s store, checked November 18, 2026. Accuracy figures are each maker’s own lab figures.
Do you even need a 3D scanner?
Start here. A scanner turns a real object into a mesh, a 3D file made of many small triangles. You can print that mesh as it is, or use it as a guide while you draw a new part.
It earns its place when a shape is hard to measure. Think of a curved knob, a car trim clip, a figure, a hand for a brace, or a broken part where the fit matters more than any one number.
When calipers and CAD win
If a part is flat faces, holes and round edges, calipers and a CAD program can be the faster route. A bracket, a spacer or a shelf peg is quick to draw. You get a clean model you can edit, and you skip the clean up a scan needs.
A scan gives you a mesh, not a CAD model. To change a hole size you’d still redraw it. Creality says as much in its own Pika guide, which lists reverse engineering reference meshes as a use, not finished CAD files.
A quick test. If calipers get you the part in ten minutes, draw it. If you’d spend an hour guessing at curves, a scanner starts to make sense.
Don’t own a printer yet? Start with our best 3D printers guide, or the best 3D printer for beginners picks.
Best 3D scanners for 2026: the picks
Eight scanners, sorted from the pick for most people to the high end. Each price is the maker’s own store price on November 18, 2026, with the list price beside it where the store shows one.
Creality Pika
Best for most printer owners. Not tested by Nick.
- Blue laser mode up to 0.03 mm, infrared up to 0.1 mm, both Creality’s lab figures
- Objects from about 10 mm to 2 m, by Creality
- About 260 g, with a 3350 mAh battery and a spare
- WiFi 6, with Android, iOS, Windows and macOS
699 dollars on Creality’s store, list price checked November 18, 2026
Check price at CrealityCreality Ferret SE
Best budget. Not tested by Nick.
- Up to 0.1 mm, by Creality
- Scan range of 150 to 2000 mm
- 24 bit colour
- Black and matte metal parts without spray, Creality says
299 dollars on Creality’s store, 319 list, list price checked November 18, 2026
Check price at CrealityRevopoint INSPIRE 2
Budget pick with infrared lasers. Not tested by Nick.
- Up to 0.05 mm, by Revopoint
- 11 infrared laser lines plus infrared structured light
- Tracks with or without markers
384 dollars on Revopoint’s store, 549 list, list price checked November 18, 2026
Creality Otter Lite
Bigger objects on a small budget. Not tested by Nick.
- Up to 0.05 mm, by Creality
- Objects from 20 to 2000 mm
- Four lens stereo vision, up to 30 fps
- Wireless with the 759 dollar kit
459 dollars wired on Creality’s store, 599 list, list price checked November 18, 2026
Check price at CrealityCreality Raptor
Most detail for the money. Not tested by Nick.
- Seven blue parallel laser lines
- Up to 0.02 mm, by Creality
- Objects from 5 to 2000 mm, up to 60 fps
- 372 g
879 dollars on Creality’s store, 1,499 list, list price checked November 18, 2026
Check price at CrealityShining 3D EINSTAR 2
A wireless hybrid. Not tested by Nick.
- 17 laser lines plus infrared VCSEL light
- Battery rated for 3 hours
- Full colour
- 3 mm and 6 mm markers in the box
854 dollars on the EINSTAR store, 1,249 list, list price checked November 18, 2026
Revopoint MIRACO Plus
Best with no computer. Not tested by Nick.
- Built in screen, so it scans on its own
- Up to 0.04 mm per frame, by Revopoint
- Photogrammetry mode for measuring big parts
1,869 dollars on Revopoint’s store, 2,199 list, list price checked November 18, 2026
Elegoo M1 Ultra
Newest high end pick. Not tested by Nick.
- Up to 0.02 mm plus 0.06 mm per metre, by Elegoo
- Blue laser sets of 34, 7 and 1 lines, plus infrared
- 511 g, WiFi 6, 3 inch touchscreen
- Elegoo’s store didn’t answer us on November 18, 2026. Check the current price
Side by side
| Scanner | How it scans | Accuracy, maker’s lab figure | Weight | Price checked |
|---|---|---|---|---|
| Creality Pika | Blue laser, 7 lines, and infrared | 0.03 mm laser, 0.1 mm infrared | About 260 g | 699 dollars |
| Creality Ferret SE | Not on the page we read | 0.1 mm | Not on the page | 299 dollars |
| Revopoint INSPIRE 2 | Infrared laser, 11 lines, and infrared light | 0.05 mm | Not in our record | 384 dollars |
| Revopoint POP 3 Plus | Infrared structured light | 0.08 mm per frame | Not in our record | 526 dollars |
| Creality Otter Lite | Four lens stereo vision | 0.05 mm | Not on the page | 459 dollars |
| Creality Raptor | Blue laser, 7 lines | 0.02 mm | 372 g | 879 dollars |
| Shining 3D EINSTAR 2 | 17 laser lines and infrared | Not in our record | Not in our record | 854 dollars |
| Revopoint MIRACO Plus | Standalone, with a photogrammetry mode | 0.04 mm per frame | Not in our record | 1,869 dollars |
| Elegoo M1 Ultra | Blue laser, 34, 7 or 1 lines, and infrared | 0.02 mm plus 0.06 mm per metre | 511 g | Check the current price |
Creality Pika: the pick for most printer owners
The Pika is small. Creality puts it at about 260 g with the battery and 100 x 60 x 35 mm, with a 3 inch touchscreen. The 3350 mAh battery comes out, and a spare is in the box.
It scans two ways. Blue laser mode uses seven parallel lines for small parts and fine shapes, down to objects 10 x 10 x 10 mm, held 160 to 400 mm away. Infrared mode is for people, colour and bigger objects, at 200 to 1,000 mm. Creality rates the laser at up to 0.03 mm and infrared at up to 0.1 mm. It says both are lab results that can shift with vibration, heat, light, calibration and how you hold it.
It connects over WiFi 6 or USB and works with Android, iOS, Windows and macOS. Frame rates drop on a phone, though. Creality lists up to 40 fps in laser mode on a phone and up to 110 fps on a PC that meets its specs, and it warns those PC specs are demanding.
Creality says the Pika handles many dark objects without spray, and that very shiny, mirror like metal may still need prep. It saves STL, OBJ, PLY and ASC files. Creality’s store listed it at 699 dollars on November 18, 2026.
Best 3D scanner under 500 dollars
Three scanners sit under 500 dollars in our tracker right now.
Creality Ferret SE, 299 dollars. It’s the cheapest scanner here, down from a 319 list. Creality claims up to 0.1 mm, a scan range of 150 to 2000 mm and 24 bit colour. It says it scans black and matte metal objects without spray, and it works with Mac and Windows.
Revopoint INSPIRE 2, 384 dollars. That’s the Standard Edition, against a 549 list, and the Premium Edition is 440. Revopoint lists up to 0.05 mm from 11 infrared laser lines plus infrared structured light, and it tracks with or without markers. Revopoint isn’t on our affiliate list, so there’s no button for it. Look it up on Revopoint’s own store.
Creality Otter Lite, 459 dollars. That’s the wired version, against a 599 list, and the wireless kit is 759. Creality claims up to 0.05 mm and objects from 20 to 2000 mm, using four lenses instead of a laser, at up to 30 fps. It also says it scans black and metal objects without spraying them.
Which one under 500? The Ferret SE costs least. The INSPIRE 2 adds infrared lasers and works with or without markers. The Otter Lite goes wireless with its 759 dollar kit.
More detail for under 1,000 dollars
Creality Raptor, 879 dollars. This is the step up when fit matters. Seven blue parallel laser lines, which Creality rates at up to 0.02 mm, objects from 5 to 2000 mm at up to 60 fps, and a 372 g body. Creality says it scans black and metal objects without spray. Its list price is 1,499.
Shining 3D EINSTAR 2, 854 dollars. A wireless hybrid with 17 laser lines plus infrared VCSEL light, full colour, a battery rated for 3 hours, and 3 mm and 6 mm markers in the box. It’s 1,249 list, and 1,243 with accessories. Our record holds no accuracy figure from EINSTAR, so the table says so.
Revopoint POP 3 Plus, 526 dollars. Infrared structured light with full colour, rated by Revopoint at up to 0.08 mm per frame. That’s the Standard Edition against a 619 list. The Advanced Edition is 611.
The INSPIRE 2, POP 3 Plus and EINSTAR 2 are all at the lowest price our tracker has recorded since it started following them on October 23.
Above 1,000 dollars: no PC, or more modes
Revopoint MIRACO Plus, 1,869 dollars. It has its own screen and scans without a computer. Revopoint lists up to 0.04 mm per frame and a photogrammetry mode for measuring big parts. The list price is 2,199.
Elegoo M1 Ultra. Elegoo launched it on October 29, 2026, with five scan modes: blue laser sets of 34, 7 and 1 lines, infrared structured light, and a blue laser mode with no markers. Elegoo rates it at up to 0.02 mm, written as 0.02 mm plus 0.06 mm per metre, from lab tests with two 100 mm spheres. It weighs 511 g, runs over WiFi 6 and has a 3 inch touchscreen.
Elegoo also says it scans black and metal surfaces without coating powder. That’s Elegoo’s claim, and Planet 3DP hasn’t tested it. It opened at a 1,599 dollar early bird price that ran to November 12. Elegoo’s store didn’t answer our read on November 18, 2026, so check the current price before you buy. Every spec is in our M1 Ultra launch report.
Watch Planet 3DP on YouTubePrinters, scanners and slicers, explained every week.
SubscribeWhere the Bambu Lab S1 stands
- Status
- Bambu Lab’s page says “November 2026 Coming soon”, with no day.
- What Bambu says
- Its first 3D scanner. “Easy in Hand. Pro in Every Scan.”
- Price
- Not announced.
- Specs
- None published.
- Tested by Nick
- No.
From Bambu Lab’s S1 page, read November 18, 2026.
That’s all Bambu Lab has put on its own page. A price, an accuracy figure or a launch day from anywhere else is a guess until Bambu publishes it, so the S1 isn’t ranked. This guide will add it once Bambu posts a price and specs.
Our new Bambu Lab printers tracker follows the S1 with the other unreleased machines, and keeps FCC filings apart from what Bambu has said. More from the maker is on our Bambu Lab page. If you need a scanner before the holidays, buy from what’s on sale now.
How 3D scanners work, in plain words
Every scanner here throws light at an object and watches how it lands. The kind of light changes what it’s good at.
| Method | How it works | Good for | Picks that use it |
|---|---|---|---|
| Blue laser lines | Thin blue lines land on the part and a camera reads how they bend | Small parts and fine detail | Pika, Raptor, M1 Ultra |
| Infrared structured light | A pattern of near infrared light covers a wider area at once | People, colour and medium to large objects | Pika, INSPIRE 2, POP 3 Plus, M1 Ultra |
| Stereo vision | Several cameras compare their views, a bit like your eyes | Objects of many sizes | Otter Lite, with four lenses |
| Photogrammetry | A model built from many photos of the part | Measuring big parts | MIRACO Plus |
Markers are small dot stickers that help a scanner keep its place. Creality says the Pika doesn’t need them for every scan, but that they still help on smooth, repeating or plain objects. Blue laser modes also cope with sun. Creality rates the Pika’s laser mode for light up to 110,000 lux.
What the accuracy numbers mean
Every accuracy figure on this page is the maker’s own, from its lab. Creality’s footnote says real results can change with vibration, heat, calibration, light, the surface, a moving object and scan distance. Elegoo’s footnote says much the same about its sphere test.
Look for two kinds of number. A per frame figure is how close one capture gets. A volumetric figure grows with size. By Elegoo’s own formula, 0.02 mm plus 0.06 mm per metre works out to 0.05 mm across a 500 mm part.
For printing, even 0.1 mm is small next to a 0.4 mm nozzle. Accuracy matters most when a part has to fit something else, like a mount, a cover or a clip.
Before you buy: surfaces, computers and files
Dark and shiny parts. Creality says the Ferret SE, Otter Lite, Raptor and Pika handle black or metal objects without spray, and Elegoo says the same of the M1 Ultra. Creality adds that mirror like metal may still need prep, so keep a can of scanning spray in mind for chrome.
Your computer. Most of these scanners lean on a PC or a phone to build the model. The MIRACO Plus is the one here that works alone. The Pika runs from a phone, at lower frame rates than on a PC. Check the maker’s recommended PC specs before you order.
The file you get. The Pika saves STL, OBJ, PLY and ASC files. STL and OBJ files open in slicers like Bambu Studio. Creality’s software also fills holes and gaps in a scan, which tells you scans come back with gaps to fix before you print.
How much does a 3D scanner cost?
A scanner worth buying for a printer starts at 299 dollars, by the prices we checked on November 18, 2026. Most of the picks sit between that and 879 dollars.
| Budget | Picks | Price checked |
|---|---|---|
| Under 500 dollars | Ferret SE, INSPIRE 2, Otter Lite | 299 to 459 dollars |
| 500 to 1,000 dollars | POP 3 Plus, Pika, EINSTAR 2, Raptor | 526 to 879 dollars |
| Above 1,000 dollars | MIRACO Plus, M1 Ultra | 1,869 dollars for the MIRACO Plus. Check the M1 Ultra’s price |
Four are well under list right now. The Raptor is 879 against 1,499, the EINSTAR 2 is 854 against 1,249, the INSPIRE 2 is 384 against 549, and the Otter Lite is 459 against 599. Check before you buy. Printer deals are on our 3D printer deals page.
Which 3D scanner should you buy?
Choose the Creality Pika if you print copies, fixes and figures and want one small scanner for both tiny parts and bigger objects.
Choose the Ferret SE if you want to try scanning for the least money.
Choose the Raptor if fit matters most, for mounts, covers and parts that meet other parts.
Look at the MIRACO Plus if you’d rather not tie a scanner to a computer.
Wait for the S1 only if you’re set on Bambu Lab and can wait for a price and specs.
3D scanner questions
What is the best 3D scanner for 3D printing?
For most printer owners, the Creality Pika. It has a blue laser mode Creality rates at up to 0.03 mm and an infrared mode for bigger objects, weighs about 260 g, and was 699 dollars on November 18, 2026. It’s a spec based pick, not tested by Nick.
What is the best cheap 3D scanner?
The Creality Ferret SE, at 299 dollars against a 319 list on November 18, 2026. Creality rates it at up to 0.1 mm.
How much does a 3D scanner cost?
The picks here run from 299 dollars for the Ferret SE to 1,869 dollars for the Revopoint MIRACO Plus, by prices checked November 18, 2026. Most sit between 299 and 879 dollars.
Is the Bambu Lab S1 scanner out?
Not yet. On November 18, 2026, Bambu Lab’s S1 page said November 2026, coming soon, with no day, no price and no specs.
Do I need a 3D scanner for 3D printing?
No. A scanner helps with curved or odd shapes you can’t measure easily. Simple parts with flat faces and holes can be quicker to draw in CAD with calipers.
How accurate are 3D scanners?
The makers here claim from 0.02 mm to 0.1 mm, all measured in their own labs. Creality and Elegoo both say real results change with vibration, heat, light and calibration.
Can a 3D scanner scan black or shiny objects?
Creality says the Pika handles many dark objects without spray, and Elegoo says the M1 Ultra scans black and metal without powder. Creality adds that mirror like metal may still need prep.
Does a 3D scanner need a computer?
Most do, or a phone. The Revopoint MIRACO Plus has its own screen and scans alone. The Creality Pika works from a phone at up to 40 fps in laser mode, or up to 110 fps on a PC.
What files does a 3D scanner make?
A mesh. The Creality Pika saves STL, OBJ, PLY and ASC files, and STL and OBJ files open in slicers like Bambu Studio.
Has Nick tested these scanners?
No. Every pick is spec based, using each maker’s own figures and dated prices.
- Creality: Pika product page and price (checked November 18, 2026)
- Creality: Pika specifications guide (checked November 18, 2026)
- Creality: Ferret SE product page (checked November 18, 2026)
- Creality: Raptor product page (checked November 18, 2026)
- Creality: Otter Lite product page (checked November 18, 2026)
- Bambu Lab: S1 3D scanner page (checked November 18, 2026)
- Elegoo: M1 Ultra product page (refused our read on November 18, 2026) (checked October 29, 2026)
- Planet 3DP: Elegoo M1 Ultra launch report (checked November 18, 2026)
- Planet 3DP price tracker: Creality, Revopoint and EINSTAR scanner prices (checked November 18, 2026)
- Revopoint store: INSPIRE 2, POP 3 Plus and MIRACO Plus figures, via our tracker (store refused our read) (checked November 18, 2026)
- EINSTAR store: EINSTAR 2 figures, via our tracker (store refused our read) (checked November 18, 2026)