Short answer: no state we checked bans 3D printers or makes them carry gun blocking tech today. The 3D printer laws in force are about making guns, gun parts and gun files. California and New York have signed laws that could one day put a rule on printers sold there. Both wait on steps that haven’t happened.
This tracker covers state rules on 3D printers and guns in the United States. Each row was read on the state legislature’s own site on November 12, 2026. Where a site refused our reader, the row says so.
It isn’t legal advice. It also leaves out federal law, other countries, and rules on copying or selling prints.
- Printer rule in force?
- No. Not in any state checked.
- Signed, but waiting
- California AB 2047 and New York’s budget law (Part C, Subpart B). Both wait on a standard or a working group first.
- In force, about guns
- Washington, Colorado and New York (Part C, Subpart A).
- Law, penalties later
- Maine, with penalties from January 1, 2027.
- Bills, no action
- Washington HB 2321 and Minnesota HF 3407.
- Not confirmed
- New Jersey and Virginia. Their sites gave our reader no bill data.
From the bill pages and session laws listed under Sources, read November 12, 2026.
3D printer laws by state: the status table
| State | Law | What it covers | Status as read | Takes effect |
|---|---|---|---|---|
| California | AB 2047, Chapter 461 | Printer makers. A sales rule once a standard exists | Signed September 26, 2026 (bill page) | January 1, 2027 (derived). Sales rule only after the steps below |
| New York | Budget law, Chapter 55, Part C, Subpart A | Crimes for sharing gun code files and making 3D printed guns | Signed, listed May 27, 2026 (Assembly page) | August 25, 2026, by our count |
| New York | Same law, Subpart B | Printer makers. Blocking tech after a working group and rules | Signed, steps under way | One year after the state makes rules |
| Washington | ESHB 2320, Chapter 203 | Making guns and frames with 3D printers or CNC mills, and gun files | Signed March 24, 2026 (session law) | March 24, 2026 |
| Washington | HB 2321 | Would require blocking tech on printers | Bill only. No action since January 12, 2026 (bill page) | Not law |
| Colorado | HB 26-1144, Chapter 94 | Knowingly 3D printing a gun or certain gun parts | Approved May 4, 2026 (session law) | July 1, 2026 |
| Maine | LD 1126, Chapter 537 | Serial numbers on homemade frames, including 3D printed ones. Bans undetectable guns | Law without the governor’s signature, January 11, 2026 (status page) | Penalties from January 1, 2027 |
| Minnesota | HF 3407 | Ghost guns, 3D printing of guns, gun design files | Bill only. Last action March 5, 2026 (status page) | Not law |
| New Jersey | Not confirmed | Not confirmed | Site returned no bill data to our reader | Not confirmed |
| Virginia | Not confirmed | Not confirmed | Site returned no bill data to our reader | Not confirmed |
Three kinds of rule, and only one touches printers
State laws here fall into three groups. Keep them apart, because headlines blur them.
Making guns. Washington, Colorado, New York and Maine now have rules on making guns or gun frames, and each names 3D printers. These rules are aimed at the person who makes the gun. They don’t regulate the printer.
Sharing gun files. Washington and New York also limit selling or sharing the digital files used to print guns. Licensed gun businesses are carved out.
Rules for printer makers. Only California and New York have signed laws aimed at the printers themselves. Each would one day require blocking tech, which checks a print file and refuses to print a gun. Neither rule has started. Both can stall if no standard appears or the tech isn’t found to work.
California AB 2047: signed, but no rule for buyers yet
California’s governor approved AB 2047 on September 26, 2026, and it became Chapter 461. It passed the Assembly 58 to 19 and the Senate 29 to 10.
The law adds the California Firearm Printing Prevention Act to the Civil Code. It works as a chain of steps.
- From July 1, 2027 at the latest, the state Department of Justice checks every quarter whether ASTM International has published a standard for blocking tech on 3D printers.
- If it has, and the standard shows the tech is workable, the department has 24 months to publish guidance or rules.
- One year after that, makers can’t sell a 3D printer in California without blocking tech that meets the rules.
- If there’s still no ASTM standard by July 1, 2029, the department doesn’t have to keep checking.
Printers used only to make props for the film and TV industry are exempt. The department can add other exceptions.
So the law sets no date when printer sales change. It sets steps. The Act itself should take effect on January 1, 2027, the usual start for a California law with no urgency clause. That date is derived, not printed in the text.
Earlier drafts went much further. The February and May versions had a crime for getting around the blocking tech, a state list of approved printers, civil penalties and a 2029 sales date. The signed text has none of them. Coverage written before September may still describe those drafts.
Get the free 3D printer laws trackerNick’s PDF covers the bills in California, New York, Washington and Colorado. It’s free by email.
Get the PDFNew York 3D printer law: gun crimes now, printer rule later
New York put its rules in the state budget, in Part C of budget bill S9005C, also numbered A10005C. Both houses passed it on May 21, 2026. The Assembly’s bill page lists it as delivered to the governor and signed as Chapter 55 on May 27, 2026.
Subpart A is about crimes. It defines a 3D printer and digital firearm manufacturing code, meaning files that can tell a printer or CNC mill to make a gun or a major gun part. Selling or sharing those files with someone who lacks both a New York gunsmith license and a federal firearms license is a class A misdemeanor. There are some exceptions. Holding the files with intent to make an illegal gun, or to pass them to a person barred from having one, is also a class A misdemeanor.
Subpart A takes effect on the 90th day after it became law. Counting from May 27, that’s August 25, 2026.
Subpart B is the printer rule, and it’s slow by design. It took effect right away. Within 90 days, three state bodies had to form a working group of experts. The group then has a year to suggest minimum standards for blocking tech. The Division of Criminal Justice Services gets nine months after that to make rules. The sales ban starts one year after those rules exist.
| Subpart B step | What the law says | Date |
|---|---|---|
| Subpart B takes effect | Right away, on becoming law | May 27, 2026 |
| Working group forms | Within 90 days | By August 25, 2026, by our count |
| Group recommends standards | Within a year of meeting | Not known yet |
| State makes rules | Within nine months of the advice | Not known yet |
| Printer sales rule starts | One year after the rules | Not known yet |
If the group finds the tech isn’t workable, no rules are needed until it decides otherwise. Planet 3DP hasn’t read an official record of the group’s work yet.
When the sales rule does start, a buyer with both a New York gunsmith license and a federal license can ask the Attorney General in writing for a printer without blocking tech. Gun industry members who break the rule face a $5,000 civil penalty per product.
Washington: in force since March 24, 2026
Washington’s ESHB 2320 became Chapter 203 when the governor signed it on March 24, 2026. An emergency clause put almost all of it in force that day. One section, a later version of the definitions, waits until June 30, 2027.
The law adds 3D printers and CNC mills to the state’s gun rules. Nobody may make a gun frame or receiver with one unless they’re a federally licensed maker, or a dealer licensed only for repairs. Selling or sharing gun files is limited to those same licensees. So is holding the files with intent to print a gun.
A first breach of the frame and file rules is a civil infraction with a $500 penalty. Repeat breaches are crimes.
A second bill, HB 2321, would require blocking tech on printers. The Legislature’s records show it was sent to committee on January 12, 2026. Nothing has happened since.
Colorado, Maine and Minnesota
Colorado
Colorado’s HB 26-1144 was approved on May 4, 2026 and took effect on July 1, 2026. It makes it a crime to knowingly make a gun or certain gun parts by 3D printing or CNC milling. The parts it names are an unfinished frame or receiver, a large capacity magazine and a rapid fire device.
A first offense is a class 1 misdemeanor. A repeat is a class 5 felony. Federally licensed gun makers and accredited gunsmithing courses are exempt.
The law covers only guns and parts that could work. It says it doesn’t apply to parts for a prop or a gun that can’t fire.
Maine
Maine’s LD 1126 became law without the governor’s signature on January 11, 2026, as Chapter 537. It bans undetectable guns. It also says anyone who makes a gun frame or receiver, including on a 3D printer or CNC mill, must have a federal firearms licensee put a serial number on it. The penalties in that chapter apply from January 1, 2027.
Minnesota
Minnesota’s HF 3407 is a bill, not a law. The Revisor’s page says it covers ghost guns, limits 3D printing of guns to federally licensed makers and bans sharing 3D printer gun files. It was introduced on February 17, 2026. The last entry on the House status page is an author added on March 5, 2026.
What it means if you own a 3D printer
None of the laws read here puts a rule on a printer someone already owns. The California and New York printer rules, if they ever start, apply to selling and delivering printers in those states.
The laws in force today are about making guns and gun parts, and about trading gun files. If the printer rules do start, they’ll matter most to printer makers and stores. What the blocking tech must do will come from standards and state rules that don’t exist yet.
Not legal advice. This page reports what the laws say and where they stand. For a question about your own case, ask a lawyer licensed in your state.
States we couldn’t confirm yet
Some roundups list New Jersey and Virginia. Their legislature sites, New Jersey’s and Virginia’s, build bill pages with scripts. They gave our reader no bill data on November 12, 2026, so this tracker shows no status for either.
Delaware, Hawaii, Oregon and Rhode Island haven’t been checked yet. A state gets a row only after it’s read on its own legislature’s site.
How this tracker stays current
These bills move fast. In 2026, Washington signed in March, Colorado and New York in May, and California in September.
Before this page changes, each row is read again on the legislature’s own site, and its read date changes with it.
3D printing news by emailNew printers, slicer updates and law changes from Planet 3DP.
Join the list3D printer law questions
Are 3D printers banned in any US state?
No. None of the states checked on November 12, 2026 bans owning or buying a 3D printer. The laws in force cover making guns and gun parts, and in some states sharing gun files.
Does California require gun blocking software on 3D printers?
Not yet. AB 2047 is signed, but its sales rule starts only after ASTM International publishes a standard, the state Department of Justice publishes guidance within 24 months, and one more year passes. The department’s checks begin by July 1, 2027.
What does the New York 3D printer law do?
Part C of New York’s 2026 budget law adds crimes for sharing gun files outside licensed gunsmiths, in force from August 25, 2026 by our count. It also starts a working group on blocking tech. A printer sales rule would begin one year after the state makes rules.
Which states have laws on 3D printed guns?
Of the states read for this page, Washington, Colorado, New York and Maine have signed laws that name 3D printers. Minnesota has a bill with no action since March 5, 2026. New Jersey and Virginia weren’t confirmed.
Do these laws cover props and cosplay?
Two say so in their text. Colorado’s law covers only guns and parts that could work, not parts for a prop gun. California’s printer rule exempts printers used only to make props for the film and TV industry.
- California Legislative Information: AB 2047. The page refused our reader, so status and text were read from the Legislative Counsel's public data file dated November 8, 2026 (checked November 12, 2026)
- New York State Assembly: A10005 bill page, actions and text (checked November 12, 2026)
- Washington State Legislature: ESHB 2320 session law, Chapter 203, Laws of 2026 (checked November 12, 2026)
- Washington State Legislature: HB 2320 bill summary (checked November 12, 2026)
- Washington State Legislature: HB 2321 bill summary (checked November 12, 2026)
- Colorado General Assembly: HB 26-1144 session law, Chapter 94 (checked November 12, 2026)
- Maine Legislature: LD 1126 status page (checked November 12, 2026)
- Maine Legislature: Chapter 537 chaptered law (checked November 12, 2026)
- Minnesota Revisor of Statutes: HF 3407 status page (checked November 12, 2026)