Polymaker launches TPU95 Matte, G-Flex PETG and PETG Translucent
Product Releases

Polymaker launches TPU95 Matte, G-Flex PETG and PETG Translucent

Nick Nicholls Nick Nicholls
· calendar_month November 17, 2026 · schedule 10 min read

Polymaker has put three new filaments on sale on its US store. TPU95 Matte and G-Flex PETG went up on November 16, 2026, and PETG Translucent followed on November 17. TPU95 Matte is a 95A flexible filament with a low gloss finish at 25.99 dollars a kilo. G-Flex PETG is a PETG made to bend and take impacts like TPU, at 21.99 dollars. PETG Translucent is a clear and coloured see through PETG for lamps and displays, from 19.99 dollars. Nick hasn’t printed any of them yet, so every figure here is Polymaker’s own.

At a glance
Maker
Polymaker.
On sale
TPU95 Matte and G-Flex PETG on November 16, 2026. PETG Translucent on November 17.
Prices (US store)
TPU95 Matte 25.99 dollars. G-Flex PETG 21.99 dollars. PETG Translucent 19.99 dollars, or 22.99 for the gradients. All 1 kg spools of 1.75 mm, checked November 17, 2026.
Colours
15 for TPU95 Matte, 10 listed for G-Flex PETG, 11 for PETG Translucent.
Availability
In stock, except four G-Flex PETG colours that couldn’t be ordered on November 17, 2026.
Tested by us
No. Nick hasn’t printed any of the three.

Prices and colours read off Polymaker’s US store on November 17, 2026. Print settings from the spool labels in Polymaker’s own product photos.

TPU95 Matte: flexible with a low gloss finish

Polymaker sells TPU95 Matte as easy to print, with true 95A flexibility and a matte surface. It says the low gloss finish makes flexible prints look less plasticky. It also says the finish stays the same at low and high print speeds.

Its suggested start is a standard 95A TPU or TPU HF profile. Polymaker notes that mainstream direct drive printers are easier to set up for it. Its maximum tested print speed is 250 mm/s, under its own test conditions. Kept dry, it says the filament prints with no obvious stringing.

The spool label lists a printing temperature of 210 to 240°C and a bed of 35 to 50°C. It also gives drying settings of 70°C for 6 hours. Polymaker’s suggested uses are phone cases, protective covers, soft clamp jaws, tool grips, drone protection and vibration damping feet. There are 15 colours, from black and white to softer pastels such as Muted Lavender, Dusty Pink and Matcha Green.

G-Flex PETG: PETG that bends

G-Flex PETG is the most unusual of the three. Polymaker describes it as an elastic PETG. It says the filament keeps the easy printing and shape of PETG and adds the impact absorption of TPU. In its ISO 179-1 unnotched Charpy test, every specimen recorded No Break in both the XY and Z directions.

Polymaker aims it at moving joints, snap fits, articulated models, props, cosplay parts and RC or drone parts. It quotes print speeds up to 300 mm/s and a volumetric flow up to 24 cubic mm per second. It says the filament works with the Bambu AMS, the AMS 2 Pro and the Creality CFS using its recommended settings. It’s VOC certified for low emissions and complies with EN 71-3, the toy safety standard for migration of certain elements.

The label reads 230 to 240°C at the nozzle and 70°C on a PEI bed with no glue. Drying is 70°C for 6 hours. One oddity: the product text says 6 colours, but the store lists 10. Green, Orange, Tan and Brown couldn’t be ordered on November 17, 2026.

The three side by side

Prices from Polymaker’s US store, read November 17, 2026. Settings from the spool labels in Polymaker’s product photos.
FilamentPrice, 1 kgNozzleBedDrying
TPU95 Matte25.99 dollars210 to 240°C35 to 50°C70°C, 6 hours
G-Flex PETG21.99 dollars230 to 240°C70°C, PEI, no glue70°C, 6 hours
PETG Translucent19.99 dollars, 22.99 for gradients240 to 260°C60 to 70°C60°C, 6 hours

Polymaker’s own top speeds differ too: 250 mm/s for TPU95 Matte, 300 mm/s for G-Flex PETG and 200 mm/s for PETG Translucent. Each figure comes from Polymaker’s own testing.

Colour names as Polymaker’s US store lists them, read November 17, 2026.
FilamentColours on the US storeNote
TPU95 MatteBlack, White, Ice Blue, Savannah Yellow, Blue, Brown, Purple, Muted Lavender, Light Brown, Dusty Pink, Matcha Green, Cool Gray, Red, Green, OrangeAll 15 in stock
G-Flex PETGBlack, White, Grey, Red, Yellow, Blue, Green, Orange, Tan, BrownGreen, Orange, Tan and Brown not orderable
PETG TranslucentClear, Translucent Red, Blue, Green, Grey and Golden Amber. Gradient Grey, Gold, Red, Blue and GreenGradients cost 22.99 dollars

PETG Translucent: clear prints at speed

PETG Translucent is built for light. Polymaker says it keeps its transparency at 200 mm/s, with less haze at speed. It targets lamp shades, light diffusers and displays lit by cool running LEDs.

Polymaker gives an as printed heat deflection temperature of 74.3°C at 1.8 MPa, tested to ISO 75. It says samples met the GWFI 850°C glow wire requirement at 0.75, 1.5 and 3.0 mm thick. The label lists 240 to 260°C at the nozzle, a 60 to 70°C bed, and drying at 60°C for 6 hours.

There are 6 translucent colours at 19.99 dollars: Clear, Red, Blue, Green, Grey and Golden Amber. Five long gradients cost 22.99: Grey, Gold, Red, Blue and Green. Polymaker’s store still lists its older PolyLite Translucent PETG. It hasn’t said whether the new line replaces it.

Not tested by Planet 3DP. Nick hasn’t printed TPU95 Matte, G-Flex PETG or PETG Translucent. Everything above is Polymaker’s own claim, from its store on November 17, 2026. If you’re printing TPU or PETG for the first time, dry the spool first. Our filament dryer guide covers the options.

All three are on Polymaker’s US store now, at the prices above. They’re also on our filament deals page, next to Polymaker’s other filaments, with prices our tracker rechecks several times a day.

Watch Planet 3DP on YouTubeFilament launches, printer news and hands on tests. Every price checked at the source.

Subscribe
Sources
  1. Polymaker US store: TPU95 Matte product page (price, colours, description), shop.polymaker.com (checked November 17, 2026)
  2. Polymaker US store: G-Flex PETG product page (price, colours, description), shop.polymaker.com (checked November 17, 2026)
  3. Polymaker US store: PETG Translucent product page (price, colours, description), shop.polymaker.com (checked November 17, 2026)
  4. Polymaker product photos: spool labels with print, bed and drying settings for each filament (checked November 17, 2026)
Nick Nicholls
Written by
Nick Nicholls
View all posts arrow_forward