Filament dryers
Today's dryer prices first. Then pick what you print and how many spools you dry.
Planet 3DP earns from affiliate links. As an Amazon Associate I earn from qualifying purchases. How this works
43% off listSUNLU
$44.99 List price $79.99
as of Nov 17
Shop at SUNLU
36% off listSUNLU
$69.99 List price $109.99
as of Nov 17
Shop at SUNLU
28% off listSUNLU
$249.99 List price $349.99
as of Nov 17
Shop at SUNLU
22% off listCreality
$66 List price $85
as of Nov 17
Shop at Creality
15% off listCreality
$89 List price $105
as of Nov 17
Shop at Creality
14% off listBambu Lab
$119 List price $139
as of Nov 17
Shop at Bambu Lab
SUNLU
$44.99 List price $79.99 43% off list
as of Nov 17
Not tested by Nick

Creality
$66 List price $85 22% off list
as of Nov 17
Not tested by Nick

Eryone
$69.99
as of Nov 17
Not tested by Nick

SUNLU
$69.99 List price $109.99 36% off list
as of Nov 17
Not tested by Nick

Snapmaker
$71.99 List price $79.99 10% off list
as of Nov 17
Not tested by Nick

Polymaker
$79.99
as of Nov 17
Not tested by Nick

Elegoo
$80
as of Nov 17
Not tested by Nick

Creality
$89 List price $105 15% off list
as of Nov 17
Not tested by Nick

SUNLU
$116.99 List price $139.99 16% off list
as of Nov 17
Nick uses this

Bambu Lab
$119 List price $139 14% off list
as of Nov 17
Not tested by Nick

SUNLU
$139.99
as of Nov 17
Not tested by Nick

SUNLU
$249.99 List price $349.99 28% off list
as of Nov 17
Not tested by Nick

EIBOS
Amazon only
See today's price on Amazon
Nick uses this
No dryer matches all of these. Remove a filter to see more.
The same dryers as the cards, side by side. The table follows the same filters. Pick a column name to sort by it.
| Dryer | Spools | Max heat | Prints while drying | Spool turns freely | Humidity | Timer | Watts | Price | Nick |
|---|---|---|---|---|---|---|---|---|---|
| SUNLUFilaDryer S2 | 1 | 70°C | Yes | Yes | Yes | Unconfirmed | 48 W | $44.99 | Not tested |
| CrealitySpace Pi V2 Filament Dryer | 1 | 75°C | Unconfirmed | Unconfirmed | Yes | Unconfirmed | Unconfirmed | $66 | Not tested |
| EryoneSnail Dryer Box M2 | 1 | 55°C | Yes | Unconfirmed | Yes | 5 h | Unconfirmed | $69.99 | Not tested |
| SUNLUFilaDryer SP2 | 2 | 70°C | Yes | Unconfirmed | Yes | 99 h | Unconfirmed | $69.99 | Not tested |
| SnapmakerSnapDryer (by Polymaker) | 1 | Not stated | Yes | Unconfirmed | Yes | 24 h | 68 W | $71.99 | Not tested |
| PolymakerPolyDryer | 1 | 73°C | Yes | Yes | Yes | 24 h | 68 W | $79.99 | Not tested |
| ElegooH1 HT Dryer Box | 1 | 85°C | Yes | Yes | Yes | 12 h | 130 W | $80 | Not tested |
| CrealitySpace Pi V2 Plus Filament Dryer | 2 | 75°C | Yes | Unconfirmed | Yes | 48 h | Unconfirmed | $89 | Not tested |
| SUNLUFilaDryer S4 | 4 | 70°C | Yes | Yes | Yes | Unconfirmed | Unconfirmed | $116.99 | Uses it |
| Bambu LabAMS HT | 1 | 85°C | Yes | Yes | Yes | Unconfirmed | 150 W | $119 | Not tested |
| SUNLUFilaDryer S4 Pro | 4 | 85°C | Yes | Yes | Yes | Unconfirmed | 380 W | $139.99 | Not tested |
| SUNLUFilaDryer E2 | 2 | 110°C | Yes | Unconfirmed | Yes | 99 h | Unconfirmed | $249.99 | Not tested |
| EIBOSPolyphemus filament dryer | 2 | 80°C | Yes | Yes | Yes | 24 h | 130 W | Amazon only | Uses it |
| No dryer matches these filters. | |||||||||
Store prices as of Nov 17. “Unconfirmed” means the maker's own pages do not confirm it, so we leave the figure out.
Two things Nick uses to store his spools once they are dry.

BIQU
5-tier steel rack · holds 40+ spools · takes boxed filament too
Nick uses this
Watch at 5:42“What I use to keep dry spools off the floor and easy to grab across multiple printers and materials.”
$69.99
Check the price on Amazon

EIBOS
10 reusable vacuum bags · 350 × 380 mm · pump not included
Nick uses this
Watch the video“The fastest way to store filament.”
$18.99
Check the price on Amazon
What each material needs in a fan oven, from Bambu Lab's drying chart for its own filament. The “I print” filter uses these figures, and the upper one where the chart gives a range.
| Material | Fan oven | Filter uses | Dryers that reach it |
|---|---|---|---|
| PLA | 50°C | 50°C | 12 dryersShow 12 dryers |
| PETG | 60 to 65°C | 65°C | 11 dryersShow 11 dryers |
| TPU | 70°C | 70°C | 11 dryersShow 11 dryers |
| ABS and ASA | 75 to 85°C | 85°C | 4 dryersShow 4 dryers |
| PC | 75 to 85°C | 85°C | 4 dryersShow 4 dryers |
| Nylon and carbon blends | 75 to 85°C | 85°C | 4 dryersShow 4 dryers |
Source: Bambu Lab Wiki: Drying filament, the fan oven column.
Snapmaker SnapDryer (by Polymaker) does not state a max heat, so it is never counted as reaching one.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.