3D Systems announced the MJP 300 on November 16, 2026, a new MultiJet printer for small, detailed plastic parts. It prints layers as fine as 16 microns, builds up to 294 x 211 x 144 mm, and cleans its wax supports off without scrubbing. It goes on sale in the first quarter of 2027. 3D Systems hasn’t published a price.
- What it is
- The MJP 300, a MultiJet plastic 3D printer.
- Maker
- 3D Systems.
- Announced
- November 16, 2026, and shown at Formnext 2026.
- Price
- Not published. The product page offers a call with an expert.
- Availability
- On sale in the first quarter of 2027.
- Build size
- Up to 294 x 211 x 144 mm.
- Finest layer
- 16 microns, in XHD mode.
From 3D Systems’s press release of November 16, 2026 and its MJP 300 product page, both read November 18, 2026.
What’s new
MultiJet is 3D Systems’s jetting process, which it has sold since 1996. The printer jets plastic part material and a wax support material, layer by layer, much like an inkjet. The part material is a resin sealed in cartridges, which is a different process from the vat machines on our resin 3D printers page. 3D Systems calls the MJP 300 the next generation of that platform. It doesn’t say whether it replaces the ProJet MJP 2500 series, which is still in its printer line up.
The changes it lists are mostly about running the machine. There are new build modes, so you can pick sharper and smoother parts or a faster build. The electronics are upgraded for faster data processing. There are new fleet management tools and added security features for sites with strict IT rules. 3D Systems also says the new supports use less material.
A material drawer holds two cartridges of part material and two of support wax. When one runs empty, the printer switches to the other mid build. The build area can be split into three lanes, so small or tall parts can be grouped and run sooner. 3D Systems says that means small parts the same day and big full builds overnight.
Build modes
| Mode | Resolution | Layer |
|---|---|---|
| HD | 800 x 900 DPI | 32 microns |
| UHD | 1600 x 900 DPI | 32 microns |
| XHD | 1600 x 900 DPI | 16 microns |
3D Systems describes HD as the balance of speed and detail, UHD as higher resolution for some materials, and XHD as the mode for sharp threads, tight tolerances and the smoothest surface.
Specifications
| Spec | MJP 300 |
|---|---|
| Build size | Up to 294 x 211 x 144 mm |
| Accuracy | Plus or minus 0.0508 mm per 25.4 mm of part size |
| Smallest feature | 200 microns |
| Machine size | 1120 x 740 x 1070 mm |
| Installation | Standard 762 mm doorway, standard AC power, at least four air changes an hour |
| Materials | Clear, white and tan rigid plastics, a transparent high temperature plastic and a castable translucent material, all VisiJet |
| Price | Not published |
Support removal without scrubbing
The wax supports come off in 3D Systems’s bench top EasyClean System. You release the parts from the build plate with a low temperature heater or a chiller, then they get a bath and a rinse. 3D Systems says no manual scrubbing or waterjet is needed, and that the whole process is safe for an office. The cartridges hold the resin inside, so they’re safe to touch.
Who it’s for
This is a professional office or workshop machine, not a hobby printer. 3D Systems aims it at the daily production of small, detailed plastic parts. It ties into its 3D Sprint software, which now includes a file protection tool called .finite that limits how many prints a workstation can make. The MJP 300 is one of the first printers that tool supports.
If you want one, 3D Systems sells through its sales team, and the product page offers a call with an expert. It’s on show at Formnext, Hall 11.0, booth D11, until November 20, and goes on sale in the first quarter of 2027.
Watch Planet 3DP on YouTubePrinter launches, from desktop to factory floor, with every figure checked at the source.
Subscribe- 3D Systems press release: A Year of Milestones in 3D Printing Culminating at Formnext 2026 (checked November 18, 2026)
- 3D Systems: MJP 300 product page and technical specifications (checked November 18, 2026)