Stratasys unveils the H550 SAF 3D printer at Formnext 2026
Product Releases

Stratasys unveils the H550 SAF 3D printer at Formnext 2026

Nick Nicholls Nick Nicholls
· calendar_month November 19, 2026 · schedule 8 min read

Stratasys unveiled the H550 at Formnext in Frankfurt on November 17, 2026. It’s a larger SAF powder bed fusion printer for production parts, with a 34.2 litre build volume and a 450 mm long axis. Preorders opened the same day, and Stratasys plans commercial availability in the second quarter of 2027. It hasn’t published a price.

At a glance
What it is
The H550, an industrial SAF powder bed fusion 3D printer.
Maker
Stratasys.
Announced
November 17, 2026, at Formnext 2026.
Price
Not published. Stratasys sells by quote.
Availability
Preorders open now. Commercial availability planned for the second quarter of 2027.
Build volume
34.2 litres, with a 450 mm long axis.
Also new
PowderEase T2, an automated powder handling station for the H550.

From Stratasys’s press release of November 17, 2026, read November 18, 2026.

What’s new compared with the H350

The H550 doesn’t replace the Stratasys SAF H350. Stratasys says it sits beside it, so buyers can pick a SAF machine by part size and volume. The two sources don’t quite agree on how much bigger it is. The press release says double the build capacity. The H550 page is more specific: a build volume nearly 80 percent larger than the H350’s, parts up to 40 percent longer, more than twice as many parts per build, and up to 50 percent more throughput. Stratasys notes those last figures vary with part size, nesting and material.

The build area is 365 x 208 x 450 mm and prints 100 micron layers. The H550 page lists two materials, SAF PA12 and SAF PA12 Powered by Evonik. Stratasys also says the printheads are industrial units that don’t need routine replacement.

Size is the headline. Stratasys says the 450 mm long axis is 20 percent longer than the leading comparable print and fuse system. It doesn’t name that system. It lists the parts it has in mind: drone parts, robot parts and end of arm tooling, medical devices, car parts, manifolds and ducts. The same build can also hold hundreds of small parts.

Stratasys also makes a cost claim. It says the H550 runs at up to 30 percent lower total cost of ownership than any comparable print and fuse system on sale, with a faster time to part than comparable SLS machines. Those are Stratasys’s own numbers, with no test method published. It adds that the machine needs less infrastructure and floor space, which makes it easier to install.

PowderEase T2 handles the powder

The second launch is PowderEase T2, a station that automates breakout, powder recovery, sieving and dosing for the H550. One station can serve up to six H550 printers, as long as they run the same material. Stratasys puts total operator time at under 30 minutes per build. The same station also handles H350 builds in the same material, so a shop that already runs an H350 can add an H550 to the same powder workflow.

H550 and PowderEase T2 at a glance

From Stratasys’s H550 press release and H550 product page, both read November 18, 2026.
ItemH550
TechnologySAF, industrial powder bed fusion
Build dimensions365 x 208 x 450 mm
Build volume34.2 litres
Layer thickness100 microns
Materials listedSAF PA12, SAF PA12 Powered by Evonik
PriceNot published
AvailabilityPreorder now, commercial in the second quarter of 2027
Claims as Stratasys words them in its press release of November 17, 2026 and on its H550 page. Planet 3DP hasn’t tested them.
Stratasys claimFigureCompared with
Build volumeNearly 80 percent largerThe H350 (the release says double the capacity)
Part lengthUp to 40 percent longerThe H350
ThroughputUp to 50 percent higherThe H350, varying with the job
Long axis length20 percent longerThe leading comparable print and fuse system, not named
Total cost of ownershipUp to 30 percent lowerAny comparable print and fuse system on sale
Time to partFasterComparable SLS systems
Operator time with PowderEase T2Under 30 minutes per buildNo comparison given

Who it’s for

This is a factory machine. Stratasys pitches it at manufacturers moving powder bed parts into production, where throughput, repeatability and cost per part matter most. It isn’t a desktop printer and doesn’t come with a store price.

Stratasys hasn’t published a price for the H550 or PowderEase T2, or said when the station ships. Businesses that want one can preorder through Stratasys or join the wait list on its H550 page. The machine is on show at Formnext, Hall 12.1, Booth D129, until November 20.

Watch Planet 3DP on YouTubePrinter launches, from desktop to factory floor, with every figure checked at the source.

Subscribe
Nick Nicholls
Written by
Nick Nicholls
View all posts arrow_forward