Some links on this page are affiliate links. If you buy through one, Planet 3DP earns a small commission at no extra cost to you. It never changes what we recommend. How this works.
These Christmas 3D prints come with the numbers most lists leave out: the print time, the filament and the plate count that each model’s own page lists. They’re grouped by how much printer time you have, from seven minute ornaments to a nutcracker that runs for days.
There are 42 days from November 13 to Christmas Day. That’s plenty for a tree full of ornaments. It’s tight for a big multi plate build if your printer has other jobs too.
None of these has been printed by Nick yet. His Christmas episode is on the way, and this page gets his own times and photos when it’s out. Until then every pick says Not tested by Nick, and every number is the one on the model page, read November 13, 2026.
Looking for things to buy a maker instead? That’s our 3D printer gifts guide.
- Fastest
- Leo.w8’s ornament set on MakerWorld: 17 designs at 7 to 21 minutes each
- Best quick gift
- NL 3dprinting’s name bauble: 49 minutes empty, 1.2 hours with a name
- One evening
- nyx_nk’s small Christmas tree: 3.5 hours, 30 g of PLA
- Weekend project
- SouthLab’s giant candy cane: 19.8 hours, 656 g, three plates
- Tested by Nick
- None yet. His Christmas episode isn’t out
- Filament to buy
- Bambu PLA Basic, 17.99 dollars a kilo. SUNLU Silk PLA+, 13.49
Times and grams from each model page, read November 13, 2026. Prices from the Planet 3DP price tracker, checked the same day.
Quick Christmas 3D prints: under an hour
Start here if Christmas is close or you want a full tree. Each of these fits on one plate or two. Most use under 15 g of filament.
Christmas Decoration / Ornament
Leo.w8 on MakerWorld. All 17 designs together add up to 3.6 hours of listed print time.
- 17 designer print profiles, one per ornament design
- 7 to 21 minutes each, one plate
- 1 to 6 g of PLA each, one color
- Standard Digital File License
- Not tested by Nick.
Christmas Ornament, 3D Snowflake (Version 2)
uetam3 on Printables. The only Printables pick here with a time in the description itself.
- The designer says it weighs around 3.5 g and prints in 15 minutes
- Any material, by the designer’s notes: PLA, PETG, ABS or a metallic filament
- Built in hanging hole
- Creative Commons Attribution NonCommercial 4.0
- Not tested by Nick.
Christmas Tree Star Ornament
Alexis_ on MakerWorld. One of the quickest single prints on this list.
- 45 minutes on the designer’s profile
- 11 g of PLA, one plate, one color
- Standard Digital File License
- Not tested by Nick.
Name bauble
NL 3dprinting on MakerWorld. You add the name in your slicer or CAD tool before printing, so each one can be a gift.
- Empty bauble: 49 minutes, 27 g of PLA in two colors, one plate
- Mom and Dad baubles: 1.2 hours, 32 g in three colors
- No supports required, by the designer’s notes
- MakerWorld Exclusive License
- Not tested by Nick.
Christmas Deer
wonderfulforest on MakerWorld. A small reindeer with 1,212 prints logged on its profile.
- 57 minutes on the designer’s profile, across two plates
- 13 g of PLA, one color, and the designer notes it needs no AMS
- CC0 (public domain)
- Not tested by Nick.
Christmas Tree Ornament Hook
jajaum3d on MakerWorld. Hooks are the print nobody remembers until the ornaments are done.
- The designer lists 0.2 mm layers, 3 walls and no supports
- No designer profile. A member’s profile lists 8 minutes and 1 g of PLA
- Creative Commons Attribution NonCommercial ShareAlike, and the designer asks for a commercial license if you sell prints
- Not tested by Nick.
Evening prints: one to seven hours
Set one of these going after dinner and it’s done by morning. Two of them need several colors, so check what your printer can feed before you pick.
Christmas Tree, realistic, different sizes
nyx_nk on MakerWorld. It also comes in a 250 mm size, which is in the weekend list below.
- Basic small, 125 mm tall: 3.5 hours, 30 g of PLA, one plate
- Small with a star: 3.5 hours, 29 g in two colors
- Standard Digital File License
- Not tested by Nick.
Spinning snowflake star
Andi on Printables. The two inner stars spin at full scale. At about 70% they need a little force, the designer says.
- Full scale: 4 hours 32 minutes and 51 g of PLA, from the designer’s print file
- 80% scale: 2.73 hours and 29 g
- Both files sliced at 0.20 mm for a Prusa MK3/S/S+
- Prints in place with no supports, 0.5 mm clearance
- Creative Commons Attribution ShareAlike 4.0, which allows commercial use
- Not tested by Nick.
Christmas train
Tomany on MakerWorld. You pick how many carriages to print, then snap the parts together.
- Locomotive: 3 hours, 55 g of PLA in four colors, six plates
- Passenger wagon: 1.7 hours, 29 g, four plates
- Standard Digital File License
- Not tested by Nick.
Cozy Christmas Fireplace Smartphone Stand
Sakul on MakerWorld. Your phone sits inside and plays a fireplace video, by the designer’s notes.
- 6.2 hours, 193 g of PLA in five colors, three plates
- A1 mini profile by the designer: 6.8 hours, 189 g, four plates
- Standard Digital File License
- Not tested by Nick.
How much filament Christmas prints use
Less than you’d think for ornaments, and more than you’d think for the big pieces. A 1 kg spool covers the 656 g candy cane with 344 g to spare. The same spool makes 76 of the 13 g deer, or more than 160 of Leo.w8’s 6 g ornaments.
For ornaments the main choice is finish. Silk PLA is the shiny one and matte PLA the flat one. Every MakerWorld profile quoted on this page lists PLA, and uetam3 says any common material works for the snowflake.
Our filament deals page lists every brand we track, priced per kilo, with its colors.
| Filament | Price checked | Store |
|---|---|---|
| Bambu PLA Basic, 1 kg with spool | 17.99 dollars | Bambu Lab US Store |
| Bambu PLA Matte, 1 kg with spool | 18.99 dollars | Bambu Lab US Store |
| SUNLU Silk PLA+, 1 kg | 13.49 dollars (list 29.99) | SUNLU Store |
| SUNLU PLA+, 1 kg | 11.59 dollars (list 18.99) | SUNLU Store |
Weekend projects: twelve hours and up
These need a free printer and a few spare evenings. Start them first if you want them done before Christmas.
Christmas Tree, 250 mm
nyx_nk on MakerWorld. nyx_nk’s tree from the evening list, on its own big profiles.
- Basic big, 250 mm tall: 12.7 hours, 159 g of PLA, one plate
- Big with a star: 13.4 hours, 181 g in two colors
- Not tested by Nick.
Christmas candy stick
SouthLab on MakerWorld. A giant candy cane you can fill with sweets or a light kit, by the designer’s notes.
- 19.8 hours, 656 g of PLA in two colors, three plates
- A version for printers without an AMS: 21.5 hours, 667 g, nine plates
- Standard Digital File License
- Not tested by Nick.
Ornamental Nutcracker Over 24 inches Tall
mocodroid on MakerWorld. The big one. Plan on two 1 kg spools and close to 38 hours of printer time.
- No designer profile on the page
- A member’s profile by AJPPrints: 37.7 hours, 1,537 g of PLA in six colors, twelve plates
- Creative Commons Attribution NonCommercial ShareAlike
- Not tested by Nick.
Print in place picks with no time listed
These two Printables models upload STL files only, so there’s no print time or filament weight to quote. Both print in place, which means the moving parts come off the plate already assembled.
Flexi Snowflake Bauble Ornament
Frikarte3D on Printables. An articulated bauble that bends like a fidget toy.
- No print time listed
- Support free, by the designer’s notes
- Designed for one filament color change, so it works without an AMS
- Personal use only. Selling prints needs a commercial membership or the designer’s OK
- Not tested by Nick.
Christmas Spinning Ornaments, 3 designs
Angie on Printables. The designer suggests gyroid infill if you print in clear filament.
- No print time listed
- Snowman, snowflake and ornament designs
- The designer printed them in SUNLU Clear PLA on a Prusa MK4S, 0.20 mm, 2 perimeters, 15% infill
- Creative Commons Attribution NonCommercial 4.0
- Not tested by Nick.
Every pick side by side
| Model | Site | Listed time | Listed filament | Colors |
|---|---|---|---|---|
| Leo.w8 ornaments | MakerWorld | 7 to 21 min | 1 to 6 g PLA | 1 color |
| uetam3 snowflake | Printables | 15 min (designer’s note) | 3.5 g | 1 color |
| Alexis_ star | MakerWorld | 45 min | 11 g PLA | 1 color |
| NL 3dprinting name bauble | MakerWorld | 49 min to 1.2 h | 27 to 32 g PLA | 2 or 3 colors |
| wonderfulforest deer | MakerWorld | 57 min | 13 g PLA | 1 color |
| nyx_nk tree, small | MakerWorld | 3.5 h | 29 to 30 g PLA | 1 or 2 colors |
| Andi spinning star | Printables | 4 h 32 min | 51 g PLA | 1 color |
| Tomany train locomotive | MakerWorld | 3 h | 55 g PLA | 4 colors |
| Sakul fireplace stand | MakerWorld | 6.2 h | 193 g PLA | 5 colors |
| nyx_nk tree, 250 mm | MakerWorld | 12.7 h | 159 g PLA | 1 color |
| SouthLab candy stick | MakerWorld | 19.8 h | 656 g PLA | 2 colors |
| mocodroid nutcracker | MakerWorld | 37.7 h (member) | 1,537 g PLA | 6 colors |
Single color or multicolor?
Seven of the twelve timed picks print in one color. They suit any printer. The name bauble, train, fireplace and nutcracker profiles use several colors. For those you either need a multicolor system or you pause and swap filament by hand. The candy cane uses two colors, but its designer also offers a version split across nine plates for printers without an AMS.
If you don’t own a printer yet, the Bambu Lab A1 mini has a profile of its own on the fireplace stand. Its bigger sibling is the Bambu Lab A1. Both list the AMS lite as their multicolor method in our directory.
| Printer | Price checked | Combo price checked |
|---|---|---|
| Bambu Lab A1 mini | 199 dollars (list 219) | 299 dollars (list 329) |
| Bambu Lab A1 | 259 dollars (list 299) | 359 dollars (list 399) |
For more choices, see our best 3D printer for beginners picks and the 3D printer deals page.
What a listed print time means
Every time on this page is an estimate from the profile it came from. MakerWorld profiles open in Bambu Studio, Bambu Lab’s slicer. Andi’s files were sliced for a Prusa MK3/S/S+. A different printer, nozzle or layer height gives a different time.
Plates matter too. The candy cane’s three plate profile lists 19.8 hours and its nine plate version 21.5. Every extra plate is one more time you have to be there to clear the bed.
Leave a buffer. A print that fails at hour ten on December 23 isn’t one you get back.
Can you sell what you print?
Check the license on the model page before you sell anything. On this list it varies a lot. The deer is CC0, so it’s free for any use. Andi’s spinning star is Creative Commons Attribution ShareAlike, which allows commercial use with credit.
Several picks use MakerWorld’s Standard Digital File License, with its terms linked from each model page. The hook’s designer asks sellers to buy a commercial license. Frikarte3D’s file is for personal use, and selling prints needs a commercial membership. Planet 3DP links each model page and hosts no files.
This isn’t legal advice. The model page is the place to check.
Tools that help
Batching ornaments means a lot of small parts to trim and clean up. Nick keeps a list of the tools he uses, and it’s free.
Essential 3D printing tools, free listEvery tool from Nick’s video on one printable page.
Get the free listChristmas 3D print questions
What are the quickest Christmas 3D prints?
On this list, Leo.w8’s ornament set on MakerWorld. Its 17 designs list 7 to 21 minutes each and 1 to 6 g of PLA. uetam3’s snowflake on Printables says 15 minutes and around 3.5 g.
How long does a 3D printed Christmas tree take?
nyx_nk’s 125 mm tree lists 3.5 hours and 30 g of PLA. The 250 mm version lists 12.7 hours and 159 g.
Has Nick printed these?
Not yet. Every pick is labeled Not tested by Nick. His Christmas episode is coming, and this page gets his own print times when it’s out.
How much filament do I need for Christmas prints?
Ornaments use 1 to 32 g each on this list. The candy cane lists 656 g and the nutcracker profile 1,537 g, so a 1 kg spool covers most picks but not the nutcracker.
Do I need a multicolor printer?
No. Seven of the twelve timed picks print in one color. The name bauble, train, fireplace and nutcracker profiles use several colors, so they need a multicolor system or hand swaps.
Can I sell Christmas ornaments I 3D print?
Only if the model’s license allows it. The deer is CC0 and Andi’s star allows commercial use with credit. For the rest, read the license on each model page first.
- MakerWorld: Christmas Decoration / Ornament by Leo.w8 (checked November 13, 2026)
- Printables: Christmas Ornament, 3D Snowflake (Version 2) by uetam3 (checked November 13, 2026)
- MakerWorld: Christmas Tree Star Ornament by Alexis_ (checked November 13, 2026)
- MakerWorld: Name bauble by NL 3dprinting (checked November 13, 2026)
- MakerWorld: Christmas Deer by wonderfulforest (checked November 13, 2026)
- MakerWorld: Christmas Tree Ornament Hook by jajaum3d (checked November 13, 2026)
- MakerWorld: Christmas Tree realistic by nyx_nk (checked November 13, 2026)
- Printables: Spinning snowflake star by Andi, print files (checked November 13, 2026)
- MakerWorld: Christmas train by Tomany (checked November 13, 2026)
- MakerWorld: Cozy Christmas Fireplace Smartphone Stand by Sakul (checked November 13, 2026)
- MakerWorld: Christmas candy stick by SouthLab (checked November 13, 2026)
- MakerWorld: Ornamental Nutcracker by mocodroid (checked November 13, 2026)
- Printables: Flexi Snowflake Bauble Ornament by Frikarte3D (checked November 13, 2026)
- Printables: Christmas Spinning Ornaments by Angie (checked November 13, 2026)
- Bambu Lab US Store: PLA Basic (checked November 13, 2026)
- Bambu Lab US Store: PLA Matte (checked November 13, 2026)
- SUNLU Store: Silk PLA+ (checked November 13, 2026)
- SUNLU Store: PLA+ (checked November 13, 2026)
- Bambu Lab US Store: A1 mini (checked November 13, 2026)
- Bambu Lab US Store: A1 (checked November 13, 2026)