Guides

Christmas 3D Prints: Ideas With Print Times

Nick Nicholls Nick Nicholls
· calendar_month November 17, 2026 · schedule 16 min read

Some links on this page are affiliate links. If you buy through one, Planet 3DP earns a small commission at no extra cost to you. It never changes what we recommend. How this works.

These Christmas 3D prints come with the numbers most lists leave out: the print time, the filament and the plate count that each model’s own page lists. They’re grouped by how much printer time you have, from seven minute ornaments to a nutcracker that runs for days.

There are 42 days from November 13 to Christmas Day. That’s plenty for a tree full of ornaments. It’s tight for a big multi plate build if your printer has other jobs too.

None of these has been printed by Nick yet. His Christmas episode is on the way, and this page gets his own times and photos when it’s out. Until then every pick says Not tested by Nick, and every number is the one on the model page, read November 13, 2026.

Looking for things to buy a maker instead? That’s our 3D printer gifts guide.

The verdict
Fastest
Leo.w8’s ornament set on MakerWorld: 17 designs at 7 to 21 minutes each
Best quick gift
NL 3dprinting’s name bauble: 49 minutes empty, 1.2 hours with a name
One evening
nyx_nk’s small Christmas tree: 3.5 hours, 30 g of PLA
Weekend project
SouthLab’s giant candy cane: 19.8 hours, 656 g, three plates
Tested by Nick
None yet. His Christmas episode isn’t out
Filament to buy
Bambu PLA Basic, 17.99 dollars a kilo. SUNLU Silk PLA+, 13.49

Times and grams from each model page, read November 13, 2026. Prices from the Planet 3DP price tracker, checked the same day.

Quick Christmas 3D prints: under an hour

Start here if Christmas is close or you want a full tree. Each of these fits on one plate or two. Most use under 15 g of filament.

Christmas Decoration / Ornament

Leo.w8 on MakerWorld. All 17 designs together add up to 3.6 hours of listed print time.

  • 17 designer print profiles, one per ornament design
  • 7 to 21 minutes each, one plate
  • 1 to 6 g of PLA each, one color
  • Standard Digital File License
  • Not tested by Nick.

Christmas Ornament, 3D Snowflake (Version 2)

uetam3 on Printables. The only Printables pick here with a time in the description itself.

  • The designer says it weighs around 3.5 g and prints in 15 minutes
  • Any material, by the designer’s notes: PLA, PETG, ABS or a metallic filament
  • Built in hanging hole
  • Creative Commons Attribution NonCommercial 4.0
  • Not tested by Nick.

Christmas Tree Star Ornament

Alexis_ on MakerWorld. One of the quickest single prints on this list.

  • 45 minutes on the designer’s profile
  • 11 g of PLA, one plate, one color
  • Standard Digital File License
  • Not tested by Nick.

Name bauble

NL 3dprinting on MakerWorld. You add the name in your slicer or CAD tool before printing, so each one can be a gift.

  • Empty bauble: 49 minutes, 27 g of PLA in two colors, one plate
  • Mom and Dad baubles: 1.2 hours, 32 g in three colors
  • No supports required, by the designer’s notes
  • MakerWorld Exclusive License
  • Not tested by Nick.

Christmas Deer

wonderfulforest on MakerWorld. A small reindeer with 1,212 prints logged on its profile.

  • 57 minutes on the designer’s profile, across two plates
  • 13 g of PLA, one color, and the designer notes it needs no AMS
  • CC0 (public domain)
  • Not tested by Nick.

Christmas Tree Ornament Hook

jajaum3d on MakerWorld. Hooks are the print nobody remembers until the ornaments are done.

  • The designer lists 0.2 mm layers, 3 walls and no supports
  • No designer profile. A member’s profile lists 8 minutes and 1 g of PLA
  • Creative Commons Attribution NonCommercial ShareAlike, and the designer asks for a commercial license if you sell prints
  • Not tested by Nick.

Evening prints: one to seven hours

Set one of these going after dinner and it’s done by morning. Two of them need several colors, so check what your printer can feed before you pick.

Christmas Tree, realistic, different sizes

nyx_nk on MakerWorld. It also comes in a 250 mm size, which is in the weekend list below.

  • Basic small, 125 mm tall: 3.5 hours, 30 g of PLA, one plate
  • Small with a star: 3.5 hours, 29 g in two colors
  • Standard Digital File License
  • Not tested by Nick.

Spinning snowflake star

Andi on Printables. The two inner stars spin at full scale. At about 70% they need a little force, the designer says.

  • Full scale: 4 hours 32 minutes and 51 g of PLA, from the designer’s print file
  • 80% scale: 2.73 hours and 29 g
  • Both files sliced at 0.20 mm for a Prusa MK3/S/S+
  • Prints in place with no supports, 0.5 mm clearance
  • Creative Commons Attribution ShareAlike 4.0, which allows commercial use
  • Not tested by Nick.

Christmas train

Tomany on MakerWorld. You pick how many carriages to print, then snap the parts together.

  • Locomotive: 3 hours, 55 g of PLA in four colors, six plates
  • Passenger wagon: 1.7 hours, 29 g, four plates
  • Standard Digital File License
  • Not tested by Nick.

Cozy Christmas Fireplace Smartphone Stand

Sakul on MakerWorld. Your phone sits inside and plays a fireplace video, by the designer’s notes.

  • 6.2 hours, 193 g of PLA in five colors, three plates
  • A1 mini profile by the designer: 6.8 hours, 189 g, four plates
  • Standard Digital File License
  • Not tested by Nick.

How much filament Christmas prints use

Less than you’d think for ornaments, and more than you’d think for the big pieces. A 1 kg spool covers the 656 g candy cane with 344 g to spare. The same spool makes 76 of the 13 g deer, or more than 160 of Leo.w8’s 6 g ornaments.

For ornaments the main choice is finish. Silk PLA is the shiny one and matte PLA the flat one. Every MakerWorld profile quoted on this page lists PLA, and uetam3 says any common material works for the snowflake.

Our filament deals page lists every brand we track, priced per kilo, with its colors.

From the Planet 3DP price tracker, checked November 13, 2026.
FilamentPrice checkedStore
Bambu PLA Basic, 1 kg with spool17.99 dollarsBambu Lab US Store
Bambu PLA Matte, 1 kg with spool18.99 dollarsBambu Lab US Store
SUNLU Silk PLA+, 1 kg13.49 dollars (list 29.99)SUNLU Store
SUNLU PLA+, 1 kg11.59 dollars (list 18.99)SUNLU Store

Weekend projects: twelve hours and up

These need a free printer and a few spare evenings. Start them first if you want them done before Christmas.

Christmas Tree, 250 mm

nyx_nk on MakerWorld. nyx_nk’s tree from the evening list, on its own big profiles.

  • Basic big, 250 mm tall: 12.7 hours, 159 g of PLA, one plate
  • Big with a star: 13.4 hours, 181 g in two colors
  • Not tested by Nick.

Christmas candy stick

SouthLab on MakerWorld. A giant candy cane you can fill with sweets or a light kit, by the designer’s notes.

  • 19.8 hours, 656 g of PLA in two colors, three plates
  • A version for printers without an AMS: 21.5 hours, 667 g, nine plates
  • Standard Digital File License
  • Not tested by Nick.

Ornamental Nutcracker Over 24 inches Tall

mocodroid on MakerWorld. The big one. Plan on two 1 kg spools and close to 38 hours of printer time.

  • No designer profile on the page
  • A member’s profile by AJPPrints: 37.7 hours, 1,537 g of PLA in six colors, twelve plates
  • Creative Commons Attribution NonCommercial ShareAlike
  • Not tested by Nick.

Print in place picks with no time listed

These two Printables models upload STL files only, so there’s no print time or filament weight to quote. Both print in place, which means the moving parts come off the plate already assembled.

Flexi Snowflake Bauble Ornament

Frikarte3D on Printables. An articulated bauble that bends like a fidget toy.

  • No print time listed
  • Support free, by the designer’s notes
  • Designed for one filament color change, so it works without an AMS
  • Personal use only. Selling prints needs a commercial membership or the designer’s OK
  • Not tested by Nick.

Christmas Spinning Ornaments, 3 designs

Angie on Printables. The designer suggests gyroid infill if you print in clear filament.

  • No print time listed
  • Snowman, snowflake and ornament designs
  • The designer printed them in SUNLU Clear PLA on a Prusa MK4S, 0.20 mm, 2 perimeters, 15% infill
  • Creative Commons Attribution NonCommercial 4.0
  • Not tested by Nick.

Every pick side by side

Each figure from the model’s own print profile or description, read November 13, 2026. Not tested by Nick. The two print in place picks with no time listed are left out.
ModelSiteListed timeListed filamentColors
Leo.w8 ornamentsMakerWorld7 to 21 min1 to 6 g PLA1 color
uetam3 snowflakePrintables15 min (designer’s note)3.5 g1 color
Alexis_ starMakerWorld45 min11 g PLA1 color
NL 3dprinting name baubleMakerWorld49 min to 1.2 h27 to 32 g PLA2 or 3 colors
wonderfulforest deerMakerWorld57 min13 g PLA1 color
nyx_nk tree, smallMakerWorld3.5 h29 to 30 g PLA1 or 2 colors
Andi spinning starPrintables4 h 32 min51 g PLA1 color
Tomany train locomotiveMakerWorld3 h55 g PLA4 colors
Sakul fireplace standMakerWorld6.2 h193 g PLA5 colors
nyx_nk tree, 250 mmMakerWorld12.7 h159 g PLA1 color
SouthLab candy stickMakerWorld19.8 h656 g PLA2 colors
mocodroid nutcrackerMakerWorld37.7 h (member)1,537 g PLA6 colors

Single color or multicolor?

Seven of the twelve timed picks print in one color. They suit any printer. The name bauble, train, fireplace and nutcracker profiles use several colors. For those you either need a multicolor system or you pause and swap filament by hand. The candy cane uses two colors, but its designer also offers a version split across nine plates for printers without an AMS.

If you don’t own a printer yet, the Bambu Lab A1 mini has a profile of its own on the fireplace stand. Its bigger sibling is the Bambu Lab A1. Both list the AMS lite as their multicolor method in our directory.

From the Planet 3DP price tracker, Bambu Lab US Store, checked November 13, 2026.
PrinterPrice checkedCombo price checked
Bambu Lab A1 mini199 dollars (list 219)299 dollars (list 329)
Bambu Lab A1259 dollars (list 299)359 dollars (list 399)

For more choices, see our best 3D printer for beginners picks and the 3D printer deals page.

What a listed print time means

Every time on this page is an estimate from the profile it came from. MakerWorld profiles open in Bambu Studio, Bambu Lab’s slicer. Andi’s files were sliced for a Prusa MK3/S/S+. A different printer, nozzle or layer height gives a different time.

Plates matter too. The candy cane’s three plate profile lists 19.8 hours and its nine plate version 21.5. Every extra plate is one more time you have to be there to clear the bed.

Leave a buffer. A print that fails at hour ten on December 23 isn’t one you get back.

Can you sell what you print?

Check the license on the model page before you sell anything. On this list it varies a lot. The deer is CC0, so it’s free for any use. Andi’s spinning star is Creative Commons Attribution ShareAlike, which allows commercial use with credit.

Several picks use MakerWorld’s Standard Digital File License, with its terms linked from each model page. The hook’s designer asks sellers to buy a commercial license. Frikarte3D’s file is for personal use, and selling prints needs a commercial membership. Planet 3DP links each model page and hosts no files.

This isn’t legal advice. The model page is the place to check.

Tools that help

Batching ornaments means a lot of small parts to trim and clean up. Nick keeps a list of the tools he uses, and it’s free.

Essential 3D printing tools, free listEvery tool from Nick’s video on one printable page.

Get the free list

Christmas 3D print questions

What are the quickest Christmas 3D prints?

On this list, Leo.w8’s ornament set on MakerWorld. Its 17 designs list 7 to 21 minutes each and 1 to 6 g of PLA. uetam3’s snowflake on Printables says 15 minutes and around 3.5 g.

How long does a 3D printed Christmas tree take?

nyx_nk’s 125 mm tree lists 3.5 hours and 30 g of PLA. The 250 mm version lists 12.7 hours and 159 g.

Has Nick printed these?

Not yet. Every pick is labeled Not tested by Nick. His Christmas episode is coming, and this page gets his own print times when it’s out.

How much filament do I need for Christmas prints?

Ornaments use 1 to 32 g each on this list. The candy cane lists 656 g and the nutcracker profile 1,537 g, so a 1 kg spool covers most picks but not the nutcracker.

Do I need a multicolor printer?

No. Seven of the twelve timed picks print in one color. The name bauble, train, fireplace and nutcracker profiles use several colors, so they need a multicolor system or hand swaps.

Can I sell Christmas ornaments I 3D print?

Only if the model’s license allows it. The deer is CC0 and Andi’s star allows commercial use with credit. For the rest, read the license on each model page first.

Nick Nicholls
Written by
Nick Nicholls
View all posts arrow_forward