Some links on this page are affiliate links. If you buy through one, Planet 3DP earns a small commission at no extra cost to you. It never changes what we recommend. How this works.
Orca Slicer and Bambu Studio are both free, open source slicers, and both slice for Bambu Lab printers. Bambu Studio is Bambu Lab’s own app and the one its wiki treats as the default for starting prints. OrcaSlicer is the community project that also covers Prusa, Creality, Voron, Elegoo and more in one app. Below you’ll find the current version of each, what Bambu Lab says about third party slicers, and Nick’s full OrcaSlicer tutorial with every chapter linked.
Nick’s video is a beginner walk through recorded on OrcaSlicer 2.3.0, not a head to head test. So this page doesn’t crown a winner on print quality. It sets the facts side by side from each project’s own release notes and Bambu Lab’s wiki, then follows the tutorial. If you’ve already picked Bambu Studio, our Bambu Studio tutorial covers the settings that matter there.
- OrcaSlicer
- Version 2.5.1, released November 14, 2026. Free, AGPL version 3.
- Bambu Studio
- Version 2.9.1, released November 3, 2026. Free, AGPL version 3.
- Choose Bambu Studio if
- You only run Bambu Lab printers and want the maker’s own app. Version 2.9.1 added the H3C and mixed nozzle diameter slicing.
- Choose OrcaSlicer if
- You run printers from more than one brand and want one slicer for all of them.
- Print quality
- No side by side test yet, so no winner here
- Real Orca website
- www.orcaslicer.com, the only official site per Orca’s own GitHub page
- The tutorial
- Recorded on OrcaSlicer 2.3.0, so some menus have moved since
Versions from each project’s GitHub releases page, checked November 18, 2026. Printer lists from Orca’s README and release notes.
Watch: Nick’s complete OrcaSlicer tutorial
- 0:00 Introduction to OrcaSlicer
- 1:17 Interface overview
- 3:27 Main menu walkthrough
- 5:53 Perspective vs orthographic view
- 8:42 Preferences and help menu
- 15:03 Modes explained
- 15:57 Prepare tab basics
- 16:54 Toolbar
- 18:41 Auto orient
- 19:56 Arrange objects
- 23:17 Move tool
- 24:11 Rotate tool
- 25:07 Scale tool
- 25:57 Lay on face tool
- 27:06 Cut tool
- 30:15 Emboss tool and text
- 34:29 Measure tool
- 37:06 Assemble tool
- 39:56 Brim ears tool
- 43:03 Process menu
- 58:13 Quality tab
- 1:01:41 Seam painting
- 1:05:00 Strength tab
- 1:12:47 Support tab
- 1:21:40 Multimaterial tab
- 1:25:34 Others tab
- 1:34:58 Slicing and print buttons
- 1:38:16 Device tab
- 1:40:46 What slicing actually does
- 1:42:42 Preview tab
- 1:44:14 Overview windows
- 1:49:36 Wrapping it up
Chapters are from Nick’s video description. The video runs just under two hours, so jump straight to the part you need.
Orca Slicer vs Bambu Studio side by side
Every row below comes from a primary source: the two GitHub release pages, Orca’s README and wiki, and Bambu Lab’s wiki. Nothing here is a claim about which one prints better.
| OrcaSlicer | Bambu Studio | |
|---|---|---|
| Made by | The OrcaSlicer open source community | Bambu Lab |
| Price and licence | Free, GNU AGPL version 3 | Free, GNU AGPL version 3 |
| Latest release | 2.5.1, November 14, 2026 | 2.9.1, November 3, 2026 |
| Printer brands | Bambu Lab, Prusa, Creality, Voron and more, per the README | Bambu Lab, plus third party printers you set up yourself, per Bambu’s wiki |
| Newest Bambu Lab support | H2C and A2L, with mixed nozzle sizes on the H2D and X2D (2.5.0) | H3C, with mixed nozzle diameter slicing on the H3C first (2.9.1) |
| Calibration | A built in Calibration section, with a recommended order in Orca’s wiki | A Calibration page for Bambu printers. Tests for third party printers appear after the Developer Mode preference is on |
| Starting a print on a Bambu printer | Through Bambu’s optional network plugin, or over LAN | Directly. Bambu’s wiki names it as the app that doesn’t need Bambu Connect |
| Official download | orcaslicer.com or the OrcaSlicer GitHub page | Bambu Lab’s GitHub releases page |
Which OrcaSlicer website is the real one?
This trips people up, because fake download sites rank in search. OrcaSlicer’s own GitHub README carries a caution box about it. It names two fake addresses, the .com that puts a hyphen between “orca” and “slicer”, and orcaslicer[.]net, as sites pretending to be official, and warns they may lead to dangerous downloads.
The README’s own wording is plain: its only official website is www.orcaslicer.com. The source code and every release file live on the OrcaSlicer GitHub page. Nick’s video description links orcaslicer.com too. Grab it from one of those two places and nowhere else.
Downloading Bambu Studio? Bambu Lab publishes every Bambu Studio release on its GitHub releases page, with the notes for each version.
Does Orca Slicer still work with Bambu Lab printers?
Here’s what Bambu Lab itself says, from its Third party Integration page. The page carries no date, so read it as Bambu’s stated policy rather than a live status report.
- Bambu added a printer control authorization mechanism in firmware. The wiki says it went to the X series first, with the P series and A series to follow in future firmware updates.
- Once it’s on, starting a print from any software other than Bambu Studio needs Bambu Connect, Bambu’s go between app. That covers LAN and cloud printing.
- Third party slicers such as Orca Slicer can integrate Bambu’s latest network plugin for firmware updates, Live View and file downloads, but only if their maintainers build it in.
- The printer’s own LAN Developer Mode skips the authorization check, and third party software keeps working without changes. The catch is that the printer can’t connect to Bambu Cloud in that mode.
Bambu’s blog post from January 20, 2025 said it was actively working with developers like Orca Slicer on that integration. Orca’s README adds that the Bambu networking plugin is optional and is built on non free libraries from Bambu Lab.
OrcaSlicer’s recent notes show Bambu printers are still very much in scope. 2.5.1 brings back Bambu Lab LAN printers that vanished from the Device tab after the 2.5.0 upgrade, restores Flow Dynamics Calibration when sending to an A1 or A1 mini on older firmware, and fixes the HTTPS CA file for Bambu printers added by IP and access code. What none of these sources can tell you is whether every model on every current firmware sends from Orca today. Check that on your own printer before you rely on it.
How Orca and Bambu Studio are related
Nick spotted this in the video. Pick a Bambu Lab A1 in OrcaSlicer and extra Multi device and Calibration tabs appear. Pick his Elegoo Centauri Carbon and they’re gone. He shows it from 14:03. His guess was shared code, and he says plainly that it’s a guess.
Orca’s README gives the history in its own words. It says Bambu Studio forked from PrusaSlicer, and that OrcaSlicer began by drawing from BambuStudio, PrusaSlicer and ideas from Cura and SuperSlicer. The two still trade work. Orca’s 2.5.0 notes describe a profile sync with BambuStudio, and Bambu’s third party calibration page says it was partly inspired by Orca Slicer.
What’s new in OrcaSlicer 2.5 and Bambu Studio 2.9.1
OrcaSlicer 2.5.0 arrived on November 7, 2026. Orca calls it the biggest update in its history, built from nearly 1,300 pull requests by more than 180 contributors. It adds Python plugins, belt printer support, color mixing, Texture Displacement, an experimental Design tab, IDEX and IQEX parallel printing and a Speed Dial search. It also supports the Bambu Lab H2C and A2L, with mixed nozzle sizes on the H2D and X2D. The project says it starts, slices and exports noticeably faster. That’s Orca’s wording, not a test of ours.
OrcaSlicer 2.5.1 followed on November 14, 2026 as a maintenance release. It fixes printer connection and upload problems, crashes, slicing bugs and security issues. It’s the current OrcaSlicer release.
Bambu Studio 2.9.1 is Bambu’s public release from November 3, 2026. It adds support for the Bambu Lab H3C and mixed nozzle diameter slicing, where one model can use different nozzle sizes for detail and body, each at its own layer height. Bambu says the H3C gets it first. It also folds in the features of the 2.8.3 and 2.8.4 betas, which our 2.8.3 beta guide walks through. Our year of Bambu Studio updates covers 2.9.1 and the releases before it.
Upgrading Orca on a Bambu printer? Orca’s 2.5.0 notes flag one change. After the profile sync with BambuStudio, Bambu Lab process presets default to Grid sparse infill instead of Cross Hatch. Your own presets based on them switch too. To keep Cross Hatch, set it in your process preset.
| Slicer | Version | Type | Released |
|---|---|---|---|
| OrcaSlicer | 2.5.1 | Official release | November 14, 2026 |
| OrcaSlicer | 2.5.0 | Official release | November 7, 2026 |
| OrcaSlicer | 2.4.2 | Official release | July 7, 2026 |
| Bambu Studio | 2.9.1 | Public release | November 3, 2026 |
| Bambu Studio | 2.8.4 | Public beta | September 22, 2026 |
| Bambu Studio | 2.8.2.61 | Public release | August 21, 2026 |
Calibration in each slicer
OrcaSlicer keeps its calibration tests in a Calibration section of the app. Its calibration guide splits them into filament tests you repeat for each new filament and optional printer tests. The filament order it recommends is below, and each test builds on the one before.
- Temperature, with a temperature tower
- Max volumetric speed, then use a value 10 to 20 percent below the result
- Pressure advance
- Flow ratio
- Retraction, if the defaults leave stringing
Nick calls the calibration button a more advanced feature and leaves it for another video. He mentions it at 13:47.
Bambu Studio has a temperature tower, flow rate, pressure advance and retraction tests too, on Bambu’s calibration page for third party printers. That page says the options appear once you switch on the Developer Mode preference in Bambu Studio, which is a different thing from the printer’s LAN Developer Mode above. Bambu Studio also has its own Calibration page for Bambu printers, which Nick mentions in the video.
OrcaSlicer tutorial: the setup Nick recommends
Nick’s video starts with the menus and Preferences, and most of his picks are about saving time. Here are the ones he calls out, with the moment he says each.
- Set the view to orthographic. Perspective can make a model look like it hangs off the plate when it doesn’t. Shown at 5:53.
- Make Prepare the default start page, because that’s where you spend 99 percent of your time. 9:02.
- Untick Allow only one OrcaSlicer instance if you keep several 3MF files open, like he does. 9:19.
- Leave Auto sync user presets on. It syncs presets from other slicers such as Bambu Studio. 11:08.
- Stealth mode stops data going to the Bambu cloud, for people who only print over LAN. 11:25.
- Raise maximum recent projects from 18 to 25. Keep the warning for 3MF files that carry modified printer instructions switched on, since those could harm your printer. 11:57.
- Never turn off auto backup. On a slow computer, lengthen the interval instead. 12:12.
- Leave Developer mode and Skip AMS blacklist unticked. 12:44.
Save projects as 3MF rather than STL where you can. A 3MF keeps supports, variable layer heights and color data, and STL doesn’t. Nick explains why at 4:29.
The print settings Nick uses in OrcaSlicer
The process menu is where most of the video’s time goes. First, the global and objects toggle. With Global highlighted, a change applies to the whole project. Switch to Objects and you’re changing one model only. That’s at 52:16.
Printers come from a long preset list. In the video he adds a Neptune 4 Max with a 0.8 mm nozzle, and he notes that 98 percent of the time he prints on a textured PEI plate. Plate talk is at 47:39. For the process settings themselves he starts from the system presets, and he has a story about why.
| Setting | What Nick uses or suggests | In the video |
|---|---|---|
| Wall loops | Two on small or decorative prints. At least four on big ones, and lately six, because the six wall part feels much more rigid | 1:05:39 |
| Sparse infill density | 25 to 40 percent for structural parts, 10 to 20 for looks, 10 for simple toys | 1:10:16 |
| Seam position | Aligned when the model has corners or hidden edges, or paint the seam yourself | 1:01:22 |
| Support type | Tree auto. On his manta ray test, normal supports used 114 g, tree supports 46 g | 1:13:08 |
| Support threshold angle | 30 degrees as a solid starting point | 1:15:34 |
| Brim type | Mouse ear, which he says he uses all the time | 1:29:38 |
| Prime tower brim | The default 3 on short prints, about 8 on tall ones like a helmet | 1:23:14 |
Running Bambu Studio as well? Our Bambu Studio tutorial covers the settings that matter in Bambu Lab’s own slicer.
Read the tutorialSending a print: Bambu Lab vs other printers
This is where the two printer families look most different inside Orca, and the video shows both. On his Elegoo Centauri Carbon, Print opens a short upload window with options such as time lapse, bed leveling and plate type. The file goes straight to the printer over its IP address, with no cloud. That starts at 1:35:15.
On his Bambu Lab A1, the same button opens Bambu’s own print window with the model overview, flow dynamics calibration and AMS options. Extra choices appear too: print all, send, send all and send to multi device. Send to multi device can start a batch of printers a few at a time, with a wait between batches, so you don’t trip a breaker. In April 2025 Nick said it only worked with Bambu Lab printers. That part is at 1:36:03.
After an upload, Orca’s Device tab shows each printer’s own web interface. On the Centauri Carbon that means print progress, axis moves, fans, temperatures, files and time lapses in one place.
What’s changed since the video
Nick recorded on OrcaSlicer 2.3.0 and says so at the start. He flags it at 1:04. Since then Orca has added Python plugins, the Speed Dial search, the experimental Design tab and color mixing, so a few screens won’t match. The settings he explains are the core of any slicer, though, and they still sit in the same Quality, Strength, Support, Multimaterial and Others tabs.
The video also shows features that were new in 2.3.0. Fuzzy skin got noise patterns such as Perlin, Billow, Ridged Multifractal and Voronoi. That’s at 1:32:18.
Which one fits you: Orca Slicer or Bambu Studio?
Both are free, so you can install both and open the same 3MF in either. Here’s how the sources line up by the printers you own.
| You own | Start with | Why, from the sources |
|---|---|---|
| Bambu Lab printers only | Bambu Studio | It’s Bambu’s own app, 2.9.1 added the new H3C, and Bambu’s wiki exempts it from the Bambu Connect step |
| Bambu Lab plus another brand | OrcaSlicer | One app with profiles for Bambu Lab, Prusa, Creality, Voron and more. Nick switches between an A1 and a Centauri Carbon in one window |
| Elegoo | OrcaSlicer | Nick sends to his Centauri Carbon over its IP address in the video, and his description lists Elegoo as compatible |
| Creality | OrcaSlicer | 2.5.1 fixed Upload and Print on six Creality models, the K2 SE among them, where the print never started |
| Flashforge | OrcaSlicer | 2.5.1 fixed the bed and hotend models in profiles such as the AD5X and Adventurer 5M |
New to all of this? Our beginner guide to 3D printing starts before the slicer. And whichever you pick, the printers below are the ones this page names. The Neptune 4 Max is the printer Nick adds a 0.8 mm nozzle profile for in the tutorial.
Learning Bambu Studio instead?
This is Nick’s Bambu Studio beginner tutorial, the counterpart to the Orca video. In the Orca video he sends you to his Bambu Studio tutorials for variable layer height, at 1:44:52. The written version is our Bambu Studio tutorial, linked at the top of this page.
Watch Planet 3DP on YouTubeSlicer tutorials, Bambu Studio updates and hands on printer tests every week.
SubscribeOrca Slicer vs Bambu Studio questions
Is OrcaSlicer free?
Yes. OrcaSlicer is free and open source under the GNU AGPL version 3. Bambu Studio is free under the same licence.
Which OrcaSlicer website is official?
Orca’s GitHub README says its only official website is www.orcaslicer.com, and the code and releases live at github.com/OrcaSlicer/OrcaSlicer. It also warns about lookalike sites that pretend to be official.
Does Orca Slicer work with Bambu Lab printers?
Orca has Bambu Lab profiles and its November 2026 releases still fix Bambu LAN printing. Bambu’s wiki says that once its authorization firmware is on, starting a print from software other than Bambu Studio needs Bambu Connect, unless the printer is in LAN Developer Mode. Check on your own printer and firmware.
Is OrcaSlicer based on Bambu Studio?
Orca’s README says it began by drawing from BambuStudio, PrusaSlicer and ideas from Cura and SuperSlicer. Nick’s guess in the video is that the two use similar code bases.
What's the latest version of OrcaSlicer and Bambu Studio?
OrcaSlicer 2.5.1, released November 14, 2026, and Bambu Studio 2.9.1, released November 3, 2026, checked November 18, 2026.
What version of OrcaSlicer is Nick's tutorial on?
OrcaSlicer 2.3.0. Newer versions add features such as Python plugins and Speed Dial, so some screens look different, but the core settings are the same.
Should I use tree supports or normal supports in OrcaSlicer?
In Nick’s test on a manta ray model, normal supports used 114 g of filament and tree supports used 46 g. He suggests normal supports for simple shapes and tree supports for detailed models, and says to slice both and compare.
What's the difference between global and object settings in OrcaSlicer?
Global settings apply to the whole project. Object settings apply to one model only, so you can give one part more walls or different supports.
- Planet 3DP video: How To Use OrcaSlicer, Complete Beginner Tutorial (April 2025) (checked November 18, 2026)
- Planet 3DP video: How To Use Bambu Studio, Complete Beginner Tutorial (June 2024) (checked November 18, 2026)
- OrcaSlicer on GitHub: V2.5.1 release notes (checked November 18, 2026)
- OrcaSlicer on GitHub: V2.5.0 release notes (checked November 18, 2026)
- OrcaSlicer on GitHub: README, official links and background (checked November 18, 2026)
- OrcaSlicer official website (checked November 18, 2026)
- OrcaSlicer Wiki: Calibration Guide (checked November 18, 2026)
- Bambu Lab on GitHub: Bambu Studio 2.9.1 release notes (checked November 18, 2026)
- Bambu Lab on GitHub: Bambu Studio releases (checked November 18, 2026)
- Bambu Lab Wiki: Third party Integration (checked November 18, 2026)
- Bambu Lab Wiki: Calibration for third party printers in Bambu Studio (checked November 18, 2026)
- Bambu Lab blog: Updates and third party integration with Bambu Connect (January 20, 2025) (checked November 18, 2026)